Qt:Документация 4.3.2/qrectf

Материал из Wiki.crossplatform.ru

Версия от 08:58, 29 января 2009; Root (Обсуждение | вклад)
(разн.) ← Предыдущая | Текущая версия (разн.) | Следующая → (разн.)
Перейти к: навигация, поиск
40px Внимание: Актуальная версия перевода документации находится здесь

__NOTOC__

Image:qt-logo.png

Главная · Все классы · Основные классы · Классы по группам · Модули · Функции

Image:trolltech-logo.png

Содержание

[править] QRectF Class Reference
[модуль QtCore ]

The QRectF class defines a rectangle in the plane using floating point precision. Далее... 

 #include <QRectF>

[править] Открытые функции

[править] Связанные не-члены

  • Q_CORE_EXPORT_INLINE operator!= ( const QRectF & r1, const QRectF & r2 )
  • QDataStream & operator<< ( QDataStream & stream, const QRectF & rectangle )
  • Q_CORE_EXPORT_INLINE operator== ( const QRectF & r1, const QRectF & r2 )
  • QDataStream & operator>> ( QDataStream & stream, QRectF & rectangle )

[править] Подробное описание

The QRectF class defines a rectangle in the plane using floating point precision.

A rectangle is normally expressed as an upper-left corner and a size. The size (width and height) of a QRectF is always equivalent to the mathematical rectangle that forms the basis for its rendering.

A QRectF can be constructed with a set of left, top, width and height integers, or from a QPoint and a QSize. The following code creates two identical rectangles. 

 QRectF r1(100, 200, 11, 16);
 QRectF r2(QPoint(100, 200), QSize(11, 16));

There is also a third constructor creating a QRectF from a QRect, and a corresponding toRect() function that returns a QRect object based on the values of this rectangle (note that the coordinates in the returned rectangle are rounded to the nearest integer).

The QRectF class provides a collection of functions that return the various rectangle coordinates, and enable manipulation of these. QRectF also provide functions to move the rectangle relative to the various coordinates. In addition there is a moveTo() function that moves the rectangle, leaving its top left corner at the given coordinates. Alternatively, the translate() function moves the rectangle the given offset relative to the current position, and the translated() function returns a translated copy of this rectangle.

The size() function returns the rectange's dimensions as a QSize. The dimensions can also be retrieved separately using the width() and height() functions. To manipulate the dimensions use the setSize(), setWidth() or setHeight() functions. Alternatively, the size can be changed by applying either of the functions setting the rectangle coordinates, for example, setBottom() or setRight().

The contains() function tells whether a given point is inside the rectangle or not, and the intersects() function returns true if this rectangle intersects with a given rectangle (otherwise false). The QRectF class also provides the intersected() function which returns the intersection rectangle, and the united() function which returns the rectangle that encloses the given rectangle and this:


center center
intersected() united()

The isEmpty() function returns true if the rectangle's width or height is less than, or equal to, 0. Note that an empty rectangle is not valid: The isValid() function returns true if both width and height is larger than 0. A null rectangle ( isNull() == true) on the other hand, has both width and height set to 0.

Note that due to the way QRect and QRectF are defined, an empty QRectF is defined in essentially the same way as QRect.

Finally, QRectF objects can be streamed as well as compared.

[править] Rendering

When using an anti-aliased painter, the boundary line of a QRectF will be rendered symmetrically on both sides of the mathematical rectangle's boundary line. But when using an aliased painter (the default) other rules apply.

Then, when rendering with a one pixel wide pen the QRectF's boundary line will be rendered to the right and below the mathematical rectangle's boundary line.

When rendering with a two pixels wide pen the boundary line will be split in the middle by the mathematical rectangle. This will be the case whenever the pen is set to an even number of pixels, while rendering with a pen with an odd number of pixels, the spare pixel will be rendered to the right and below the mathematical rectangle as in the one pixel case.


center Файл:Qrectf-diagram-one.png
Logical representation One pixel wide pen
Файл:Qrectf-diagram-two.png Файл:Qrectf-diagram-three.png
Two pixel wide pen Three pixel wide pen

[править] Coordinates

The QRectF class provides a collection of functions that return the various rectangle coordinates, and enable manipulation of these. QRectF also provide functions to move the rectangle relative to the various coordinates.

For example: the bottom(), setBottom() and moveBottom() functions: bottom() returns the y-coordinate of the rectangle's bottom edge, setBottom() sets the bottom edge of the rectangle to the given y coordinate (it may change the height, but will never change the rectangle's top edge) and moveBottom() moves the entire rectangle vertically, leaving the rectangle's bottom edge at the given y coordinate and its size unchanged.

Файл:Qrectf-coordinates.png

It is also possible to add offsets to this rectangle's coordinates using the adjust() function, as well as retrieve a new rectangle based on adjustments of the original one using the adjusted() function. If either of the width and height is negative, use the normalized() function to retrieve a rectangle where the corners are swapped.

In addition, QRectF provides the getCoords() function which extracts the position of the rectangle's top-left and bottom-right corner, and the getRect() function which extracts the rectangle's top-left corner, width and height. Use the setCoords() and setRect() function to manipulate the rectangle's coordinates and dimensions in one go.

See also QRect and QRegion.

[править] Описание функций-членов

[править]
QRectF::QRectF ()

Constructs a null rectangle.

Смотрите также isNull().

[править]
QRectF::QRectF ( const QPointF & topLeft, const QSizeF & size )

Constructs a rectangle with the given topLeft corner and the given size.

See also setTopLeft() and setSize().

[править]
QRectF::QRectF ( const QPointF & topLeft, const QPointF & bottomRight )

Constructs a rectangle with the given topLeft and bottomRight corners.

Эта функция была введена в Qt 4.3.

See also setTopLeft() and setBottomRight().

[править]
QRectF::QRectF ( qreal x, qreal y, qreal width, qreal height )

Constructs a rectangle with (x, y) as its top-left corner and the given width and height.

See also setRect().

[править]
QRectF::QRectF ( const QRect & rectangle )

Constructs a QRectF rectangle from the given QRect rectangle.

See also toRect().

[править]
void QRectF::adjust ( qreal dx1, qreal dy1, qreal dx2, qreal dy2 )

Adds dx1, dy1, dx2 and dy2 respectively to the existing coordinates of the rectangle.

See also adjusted() and setRect().

[править]
QRectF QRectF::adjusted ( qreal dx1, qreal dy1, qreal dx2, qreal dy2 ) const

Returns a new rectangle with dx1, dy1, dx2 and dy2 added respectively to the existing coordinates of this rectangle.

See also adjust().

[править]
qreal QRectF::bottom () const

Returns the y-coordinate of the rectangle's bottom edge.

See also setBottom(), bottomLeft(), and bottomRight().

[править]
QPointF QRectF::bottomLeft () const

Returns the position of the rectangle's bottom-left corner.

See also setBottomLeft(), bottom(), and left().

[править]
QPointF QRectF::bottomRight () const

Returns the position of the rectangle's bottom-right corner.

See also setBottomRight(), bottom(), and right().

[править]
QPointF QRectF::center () const

Returns the center point of the rectangle.

See also moveCenter().

[править]
bool QRectF::contains ( const QPointF & point ) const

Returns true if the given point is inside or on the edge of the rectangle; otherwise returns false.

See also intersects().

[править]
bool QRectF::contains ( qreal x, qreal y ) const

Эта перегруженная функция предоставлена для удобства.

Returns true if the point (x, y) is inside or on the edge of the rectangle; otherwise returns false.

[править]
bool QRectF::contains ( const QRectF & rectangle ) const

Эта перегруженная функция предоставлена для удобства.

Returns true if the given rectangle is inside this rectangle; otherwise returns false.

[править]
void QRectF::getCoords ( qreal * x1, qreal * y1, qreal * x2, qreal * y2 ) const

Extracts the position of the rectangle's top-left corner to *x1 and *y1, and the position of the bottom-right corner to *x2 and *y2.

See also setCoords() and getRect().

[править]
void QRectF::getRect ( qreal * x, qreal * y, qreal * width, qreal * height ) const

Extracts the position of the rectangle's top-left corner to *x and *y, and its dimensions to *width and *height.

See also setRect() and getCoords().

[править]
qreal QRectF::height () const

Returns the height of the rectangle.

See also setHeight(), width(), and size().

[править]
QRectF QRectF::intersected ( const QRectF & rectangle ) const

Returns the intersection of this rectangle and the given rectangle. Note that r.intersected(s) is equivalent to r & s.

center

Эта функция была введена в Qt 4.2.

See also intersects(), united(), and operator&=().

[править]
bool QRectF::intersects ( const QRectF & rectangle ) const

Returns true if this rectangle intersects with the given rectangle (i.e. there is a non-empty area of overlap between them), otherwise returns false.

The intersection rectangle can be retrieved using the intersected() function.

See also contains().

[править]
bool QRectF::isEmpty () const

Returns true if the rectangle is empty, otherwise returns false.

An empty rectangle has width() <= 0 or height() <= 0. An empty rectangle is not valid (i.e., isEmpty() == ! isValid()).

Use the normalized() function to retrieve a rectangle where the corners are swapped.

See also isNull(), isValid(), and normalized().

[править]
bool QRectF::isNull () const

Returns true if the rectangle is a null rectangle, otherwise returns false.

A null rectangle has both the width and the height set to 0. A null rectangle is also empty, and hence not valid.

See also isEmpty() and isValid().

[править]
bool QRectF::isValid () const

Returns true if the rectangle is valid, otherwise returns false.

A valid rectangle has a width() > 0 and height() > 0. Note that non-trivial operations like intersections are not defined for invalid rectangles. A valid rectangle is not empty (i.e., isValid() == ! isEmpty()).

See also isNull(), isEmpty(), and normalized().

[править]
qreal QRectF::left () const

Returns the x-coordinate of the rectangle's left edge. Equivalent to x().

See also setLeft(), topLeft(), and bottomLeft().

[править]
void QRectF::moveBottom ( qreal y )

Moves the rectangle vertically, leaving the rectangle's bottom edge at the given y coordinate. The rectangle's size is unchanged.

See also bottom(), setBottom(), and moveTop().

[править]
void QRectF::moveBottomLeft ( const QPointF & position )

Moves the rectangle, leaving the bottom-left corner at the given position. The rectangle's size is unchanged.

See also setBottomLeft(), moveBottom(), and moveLeft().

[править]
void QRectF::moveBottomRight ( const QPointF & position )

Moves the rectangle, leaving the bottom-right corner at the given position. The rectangle's size is unchanged.

See also setBottomRight(), moveBottom(), and moveRight().

[править]
void QRectF::moveCenter ( const QPointF & position )

Moves the rectangle, leaving the center point at the given position. The rectangle's size is unchanged.

See also center().

[править]
void QRectF::moveLeft ( qreal x )

Moves the rectangle horizontally, leaving the rectangle's left edge at the given x coordinate. The rectangle's size is unchanged.

See also left(), setLeft(), and moveRight().

[править]
void QRectF::moveRight ( qreal x )

Moves the rectangle horizontally, leaving the rectangle's right edge at the given x coordinate. The rectangle's size is unchanged.

See also right(), setRight(), and moveLeft().

[править]
void QRectF::moveTo ( qreal x, qreal y )

Moves the rectangle, leaving the top-left corner at the given position (x, y). The rectangle's size is unchanged.

See also translate() and moveTopLeft().

[править]
void QRectF::moveTo ( const QPointF & position )

Эта перегруженная функция предоставлена для удобства.

Moves the rectangle, leaving the top-left corner at the given position.

[править]
void QRectF::moveTop ( qreal y )

Moves the rectangle vertically, leaving the rectangle's top line at the given y coordinate. The rectangle's size is unchanged.

See also top(), setTop(), and moveBottom().

[править]
void QRectF::moveTopLeft ( const QPointF & position )

Moves the rectangle, leaving the top-left corner at the given position. The rectangle's size is unchanged.

See also setTopLeft(), moveTop(), and moveLeft().

[править]
void QRectF::moveTopRight ( const QPointF & position )

Moves the rectangle, leaving the top-right corner at the given position. The rectangle's size is unchanged.

See also setTopRight(), moveTop(), and moveRight().

[править]
QRectF QRectF::normalized () const

Returns a normalized rectangle; i.e., a rectangle that has a non-negative width and height.

If width() < 0 the function swaps the left and right corners, and it swaps the top and bottom corners if height() < 0.

See also isValid() and isEmpty().

[править] qreal QRectF::right () const

Returns the x-coordinate of the rectangle's right edge.

See also setRight(), topRight(), and bottomRight().

[править]
void QRectF::setBottom ( qreal y )

Sets the bottom edge of the rectangle to the given y coordinate. May change the height, but will never change the top edge of the rectangle.

See also bottom() and moveBottom().

[править]
void QRectF::setBottomLeft ( const QPointF & position )

Set the bottom-left corner of the rectangle to the given position. May change the size, but will the never change the top-right corner of the rectangle.

See also bottomLeft() and moveBottomLeft().

[править]
void QRectF::setBottomRight ( const QPointF & position )

Set the top-right corner of the rectangle to the given position. May change the size, but will the never change the top-left corner of the rectangle.

See also bottomRight() and moveBottomRight().

[править]
void QRectF::setCoords ( qreal x1, qreal y1, qreal x2, qreal y2 )

Sets the coordinates of the rectangle's top-left corner to (x1, y1), and the coordinates of its bottom-right corner to (x2, y2).

See also getCoords() and setRect().

[править]
void QRectF::setHeight ( qreal height )

Sets the height of the rectangle to the given height. The bottom edge is changed, but not the top one.

See also height() and setSize().

[править]
void QRectF::setLeft ( qreal x )

Sets the left edge of the rectangle to the given x coordinate. May change the width, but will never change the right edge of the rectangle.

Equivalent to setX().

See also left() and moveLeft().

[править]
void QRectF::setRect ( qreal x, qreal y, qreal width, qreal height )

Sets the coordinates of the rectangle's top-left corner to (x, y), and its size to the given width and height.

See also getRect() and setCoords().

[править]
void QRectF::setRight ( qreal x )

Sets the right edge of the rectangle to the given x coordinate. May change the width, but will never change the left edge of the rectangle.

See also right() and moveRight().

[править]
void QRectF::setSize ( const QSizeF & size )

Sets the size of the rectangle to the given size. The top-left corner is not moved.

See also size(), setWidth(), and setHeight().

[править]
void QRectF::setTop ( qreal y )

Sets the top edge of the rectangle to the given y coordinate. May change the height, but will never change the bottom edge of the rectangle.

Equivalent to setY().

See also top() and moveTop().

[править]
void QRectF::setTopLeft ( const QPointF & position )

Set the top-left corner of the rectangle to the given position. May change the size, but will the never change the bottom-right corner of the rectangle.

See also topLeft() and moveTopLeft().

[править]
void QRectF::setTopRight ( const QPointF & position )

Set the top-right corner of the rectangle to the given position. May change the size, but will the never change the bottom-left corner of the rectangle.

See also topRight() and moveTopRight().

[править]
void QRectF::setWidth ( qreal width )

Sets the width of the rectangle to the given width. The right edge is changed, but not the left one.

See also width() and setSize().

[править]
void QRectF::setX ( qreal x )

Sets the left edge of the rectangle to the given x coordinate. May change the width, but will never change the right edge of the rectangle.

Equivalent to setLeft().

See also x(), setY(), and setTopLeft().

[править]
void QRectF::setY ( qreal y )

Sets the top edge of the rectangle to the given y coordinate. May change the height, but will never change the bottom edge of the rectangle.

Equivalent to setTop().

See also y(), setX(), and setTopLeft().

[править]
QSizeF QRectF::size () const

Returns the size of the rectangle.

See also setSize(), width(), and height().

[править]
QRect QRectF::toAlignedRect () const

Returns a QRect based on the values of this rectangle that is the smallest possible integer rectangle that completely contains this rectangle.

Эта функция была введена в Qt 4.3.

See also toRect().

[править]
QRect QRectF::toRect () const

Returns a QRect based on the values of this rectangle. Note that the coordinates in the returned rectangle are rounded to the nearest integer.

See also QRectF() and toAlignedRect().

[править]
qreal QRectF::top () const

Returns the y-coordinate of the rectangle's top edge. Equivalent to y().

See also setTop(), topLeft(), and topRight().

[править]
QPointF QRectF::topLeft () const

Returns the position of the rectangle's top-left corner.

See also setTopLeft(), top(), and left().

[править]
QPointF QRectF::topRight () const

Returns the position of the rectangle's top-right corner.

See also setTopRight(), top(), and right().

[править]
void QRectF::translate ( qreal dx, qreal dy )

Moves the rectangle dx along the x-axis and dy along the y-axis, relative to the current position. Positive values move the rectangle to the right and downwards.

See also moveTopLeft(), moveTo(), and translated().

[править]
void QRectF::translate ( const QPointF & offset )

Эта перегруженная функция предоставлена для удобства.

Moves the rectangle offset. x() along the x axis and offset. y() along the y axis, relative to the current position.

[править]
QRectF QRectF::translated ( qreal dx, qreal dy ) const

Returns a copy of the rectangle that is translated dx along the x axis and dy along the y axis, relative to the current position. Positive values move the rectangle to the right and down.

See also translate().

[править]
QRectF QRectF::translated ( const QPointF & offset ) const

Эта перегруженная функция предоставлена для удобства.

Returns a copy of the rectangle that is translated offset. x() along the x axis and offset. y() along the y axis, relative to the current position.

[править]
QRectF QRectF::united ( const QRectF & rectangle ) const

Returns the bounding rectangle of this rectangle and the given rectangle.

center

Эта функция была введена в Qt 4.2.

See also intersected().

[править]
qreal QRectF::width () const

Returns the width of the rectangle.

See also setWidth(), height(), and size().

[править]
qreal QRectF::x () const

Returns the x-coordinate of the rectangle's left edge. Equivalent to left().

See also setX(), y(), and topLeft().

[править]
qreal QRectF::y () const

Returns the y-coordinate of the rectangle's top edge. Equivalent to top().

See also setY(), x(), and topLeft().

[править]
QRectF QRectF::operator& ( const QRectF & rectangle ) const

Returns the intersection of this rectangle and the given rectangle. Returns an empty rectangle if there is no intersection.

See also operator&=() and intersected().

[править]
QRectF & QRectF::operator&= ( const QRectF & rectangle )

Intersects this rectangle with the given rectangle.

See also intersected() and operator|=().

[править]
QRectF QRectF::operator| ( const QRectF & rectangle ) const

Returns the bounding rectangle of this rectangle and the given rectangle.

See also united() and operator|=().

[править]
QRectF & QRectF::operator|= ( const QRectF & rectangle )

Unites this rectangle with the given rectangle.

See also united() and operator|().

[править] Связанные не-члены

[править]
Q_CORE_EXPORT_INLINE operator!= ( const QRectF & r1, const QRectF & r2 )

Эта перегруженная функция предоставлена для удобства.

Returns true if the rectangles r1 and r2 are different, otherwise returns false.

[править]
QDataStream & operator<< ( QDataStream & stream, const QRectF & rectangle )

Эта перегруженная функция предоставлена для удобства.

Writes the rectangle to the stream, and returns a reference to the stream.

See also Format of the QDataStream operators.

[править]
Q_CORE_EXPORT_INLINE operator== ( const QRectF & r1, const QRectF & r2 )

Эта перегруженная функция предоставлена для удобства.

Returns true if the rectangles r1 and r2 are equal, otherwise returns false.

[править]
QDataStream & operator>> ( QDataStream & stream, QRectF & rectangle )

Эта перегруженная функция предоставлена для удобства.

Reads a rectangle from the stream, and returns a reference to the stream.

See also Format of the QDataStream operators.


Copyright © 2007 Trolltech Trademarks
Qt 4.3.2
Источник — «http://wiki.crossplatform.ru/index.php?title=Qt:%D0%94%D0%BE%D0%BA%D1%83%D0%BC%D0%B5%D0%BD%D1%82%D0%B0%D1%86%D0%B8%D1%8F_4.3.2/qrectf»