Материал из Wiki.crossplatform.ru

Внимание: Актуальная версия перевода документации находится здесь

__NOTOC__

[править] QAbstractSlider Class Reference
^{[модуль QtGui ]}

The QAbstractSlider class provides an integer value within a range. More...

 #include <QAbstractSlider>

Inherits QWidget.

Inherited by QDial, QScrollBar, and QSlider.

• Список всех членов включая унаследованные
• Поддержка членов Qt 3

[править] Открытые типы

• enum SliderAction { SliderNoAction, SliderSingleStepAdd, SliderSingleStepSub, SliderPageStepAdd, ..., SliderMove }

[править] Свойства

• 56 свойства унаследованных от QWidget
• 1 свойство унаследованное от QObject

[править] Открытые функции

• QAbstractSlider ( QWidget * parent = 0 )
• ~QAbstractSlider ()
• bool hasTracking () const
• bool invertedAppearance () const
• bool invertedControls () const
• bool isSliderDown () const
• int maximum () const
• int minimum () const
• Qt::Orientation orientation () const
• int pageStep () const
• void setInvertedAppearance ( bool )
• void setInvertedControls ( bool )
• void setMaximum ( int )
• void setMinimum ( int )
• void setPageStep ( int )
• void setRange ( int min, int max )
• void setSingleStep ( int )
• void setSliderDown ( bool )
• void setSliderPosition ( int )
• void setTracking ( bool enable )
• int singleStep () const
• int sliderPosition () const
• void triggerAction ( SliderAction action )
• int value () const

• 201 открытых функций унаследованных от QWidget
• 29 открытых функций унаследованных от QObject
• 12 открытых функций унаследованных от QPaintDevice

[править] Открытые слоты

• void setOrientation ( Qt::Orientation )
• void setValue ( int )

• 19 открытых слотов унаследованных от QWidget
• 1 открытый слот унаследованный от QObject

[править] Сигналы

• void actionTriggered ( int action )
• void rangeChanged ( int min, int max )
• void sliderMoved ( int value )
• void sliderPressed ()
• void sliderReleased ()
• void valueChanged ( int value )

• 1 сигнал унаследованный от QWidget
• 1 сигнал унаследованный от QObject

[править] Protected Types

• enum SliderChange { SliderRangeChange, SliderOrientationChange, SliderStepsChange, SliderValueChange }

[править] Защищенные функции

• SliderAction repeatAction () const
• void setRepeatAction ( SliderAction action, int thresholdTime = 500, int repeatTime = 50 )
• virtual void sliderChange ( SliderChange change )

• 38 защищенных функций унаследованных от QWidget
• 7 защищенных функций унаследованных от QObject
• 1 защищенная функция унаследованна от QPaintDevice

[править] Дополнительные унаследованные члены

• 4 статических открытых члена унаследованных от QWidget
• 5 статических открытых члена унаследованных от QObject
• 1 защищенный слот унаследованный от QWidget

[править] Подробное описание

The QAbstractSlider class provides an integer value within a range.

The class is designed as a common super class for widgets like QScrollBar, QSlider and QDial.

Here are the main properties of the class:

1. value: The bounded integer that QAbstractSlider maintains.
2. minimum: The lowest possible value.
3. maximum: The highest possible value.
4. singleStep: The smaller of two natural steps that an abstract sliders provides and typically corresponds to the user pressing an arrow key.
5. pageStep: The larger of two natural steps that an abstract slider provides and typically corresponds to the user pressing PageUp or PageDown.
6. tracking: Whether slider tracking is enabled.
7. sliderPosition: The current position of the slider. If tracking is enabled (the default), this is identical to value.

Unity (1) may be viewed as a third step size. setValue() lets you set the current value to any integer in the allowed range, not just minimum() + n * singleStep() for integer values of n. Some widgets may allow the user to set any value at all; others may just provide multiples of singleStep() or pageStep().

QAbstractSlider emits a comprehensive set of signals:

QAbstractSlider provides a virtual sliderChange() function that is well suited for updating the on-screen representation of sliders. By calling triggerAction(), subclasses trigger slider actions. Two helper functions QStyle::sliderPositionFromValue() and QStyle::sliderValueFromPosition() help subclasses and styles to map screen coordinates to logical range values.

See also QAbstractSpinBox, QSlider, QDial, QScrollBar, and Sliders Example.

[править] Описание типов членов

[править]

enum QAbstractSlider::SliderAction

[править]

enum QAbstractSlider::SliderChange

[править] Описание свойств

[править]

invertedAppearance : bool

This property holds whether or not a slider shows its values inverted.

If this property is false (the default), the minimum and maximum will be shown in its classic position for the inherited widget. If the value is true, the minimum and maximum appear at their opposite location.

Note: This property makes most sense for sliders and dials. For scroll bars, the visual effect of the scroll bar subcontrols depends on whether or not the styles understand inverted appearance; most styles ignore this property for scroll bars.

Функции доступа:

• bool invertedAppearance () const
• void setInvertedAppearance ( bool )

[править]

invertedControls : bool

This property holds whether or not the slider inverts its wheel and key events.

If this property is false, scrolling the mouse wheel "up" and using keys like page up will increase the slider's value towards its maximum. Otherwise pressing page up will move value towards the slider's minimum.

Функции доступа:

• bool invertedControls () const
• void setInvertedControls ( bool )

[править]

maximum : int

This property holds the slider's maximum value.

When setting this property, the minimum is adjusted if necessary to ensure that the range remains valid. Also the slider's current value is adjusted to be within the new range.

Функции доступа:

• int maximum () const
• void setMaximum ( int )

[править]

minimum : int

This property holds the sliders's minimum value.

When setting this property, the maximum is adjusted if necessary to ensure that the range remains valid. Also the slider's current value is adjusted to be within the new range.

Функции доступа:

• int minimum () const
• void setMinimum ( int )

[править]

orientation : Qt::Orientation

This property holds the orientation of the slider.

The orientation must be Qt::Vertical (the default) or Qt::Horizontal.

Функции доступа:

• Qt::Orientation orientation () const
• void setOrientation ( Qt::Orientation )

[править]

pageStep : int

This property holds the page step.

The larger of two natural steps that an abstract slider provides and typically corresponds to the user pressing PageUp or PageDown.

Функции доступа:

• int pageStep () const
• void setPageStep ( int )

See also singleStep.

[править]

singleStep : int

This property holds the single step.

The smaller of two natural steps that an abstract sliders provides and typically corresponds to the user pressing an arrow key.

Функции доступа:

• int singleStep () const
• void setSingleStep ( int )

See also pageStep.

[править]

sliderDown : bool

This property holds whether the slider is pressed down.

The property is set by subclasses in order to let the abstract slider know whether or not tracking has any effect.

Changing the slider down property emits the sliderPressed() and sliderReleased() signals.

Функции доступа:

• bool isSliderDown () const
• void setSliderDown ( bool )

[править]

sliderPosition : int

This property holds the current slider position.

If tracking is enabled (the default), this is identical to value.

Функции доступа:

• int sliderPosition () const
• void setSliderPosition ( int )

[править]

tracking : bool

This property holds whether slider tracking is enabled.

If tracking is enabled (the default), the slider emits the valueChanged() signal while the slider is being dragged. If tracking is disabled, the slider emits the valueChanged() signal only when the user releases the slider.

Функции доступа:

• bool hasTracking () const
• void setTracking ( bool enable )

See also sliderDown.

[править]

value : int

This property holds the slider's current value.

The slider forces the value to be within the legal range: minimum <= value <= maximum.

Changing the value also changes the sliderPosition.

Функции доступа:

• int value () const
• void setValue ( int )

[править] Описание функций-членов

[править]

QAbstractSlider::QAbstractSlider ( QWidget * parent = 0 )

Constructs an abstract slider.

The parent arguments is sent to the QWidget constructor.

The minimum defaults to 0, the maximum to 99, with a singleStep size of 1 and a pageStep size of 10, and an initial value of 0.

[править]

QAbstractSlider::~QAbstractSlider ()

Destroys the slider.

[править]

void QAbstractSlider::actionTriggered ( int action ) [signal]

This signal is emitted when the slider action action is triggered. Actions are SliderSingleStepAdd, SliderSingleStepSub, SliderPageStepAdd, SliderPageStepSub, SliderToMinimum, SliderToMaximum, and SliderMove.

When the signal is emitted, the sliderPosition has been adjusted according to the action, but the value has not yet been propagated (meaning the valueChanged() signal was not yet emitted), and the visual display has not been updated. In slots connected to this signal you can thus safely adjust any action by calling setSliderPosition() yourself, based on both the action and the slider's value.

See also triggerAction().

[править]

void QAbstractSlider::rangeChanged ( int min, int max ) [signal]

This signal is emitted when the slider range has changed, with min being the new minimum, and max being the new maximum.

See also minimum and maximum.

[править]

SliderAction QAbstractSlider::repeatAction () const [protected]

Returns the current repeat action.

See also setRepeatAction().

[править]

void QAbstractSlider::setRange ( int min, int max )

Sets the slider's minimum to min and its maximum to max.

If max is smaller than min, min becomes the only legal value.

See also minimum and maximum.

[править]

void QAbstractSlider::setRepeatAction ( SliderAction action, int thresholdTime = 500, int repeatTime = 50 ) [protected]

Sets action action to be triggered repetitively in intervals of repeatTime, after an initial delay of thresholdTime.

See also triggerAction() and repeatAction().

[править]

void QAbstractSlider::sliderChange ( SliderChange change ) [virtual protected]

Reimplement this virtual function to track slider changes such as SliderRangeChange, SliderOrientationChange, SliderStepsChange, or SliderValueChange. The default implementation only updates the display and ignores the change parameter.

[править]

void QAbstractSlider::sliderMoved ( int value ) [signal]

This signal is emitted when sliderDown is true and the slider moves. This usually happens when the user is dragging the slider. The value is the new slider position.

This signal is emitted even when tracking is turned off.

See also setTracking(), valueChanged(), isSliderDown(), sliderPressed(), and sliderReleased().

[править]

void QAbstractSlider::sliderPressed () [signal]

This signal is emitted when the user presses the slider with the mouse, or programmatically when setSliderDown(true) is called.

See also sliderReleased(), sliderMoved(), and isSliderDown().

[править]

void QAbstractSlider::sliderReleased () [signal]

This signal is emitted when the user releases the slider with the mouse, or programmatically when setSliderDown(false) is called.

See also sliderPressed(), sliderMoved(), and sliderDown.

[править]

void QAbstractSlider::triggerAction ( SliderAction action )

Triggers a slider action. Possible actions are SliderSingleStepAdd, SliderSingleStepSub, SliderPageStepAdd, SliderPageStepSub, SliderToMinimum, SliderToMaximum, and SliderMove.

See also actionTriggered().

[править]

void QAbstractSlider::valueChanged ( int value ) [signal]

This signal is emitted when the slider value has changed, with the new slider value as argument.