Qt:Документация 4.3.2/qbytearray

Материал из Wiki.crossplatform.ru

Версия от 07:38, 14 ноября 2008; Root (Обсуждение | вклад)
(разн.) ← Предыдущая | Текущая версия (разн.) | Следующая → (разн.)
Перейти к: навигация, поиск
40px Внимание: Актуальная версия перевода документации находится здесь

__NOTOC__

Image:qt-logo.png

Главная · Все классы · Основные классы · Классы по группам · Модули · Функции

Image:trolltech-logo.png

Содержание

[править] QByteArray Class Reference
[модуль QtCore ]

The QByteArray class provides an array of bytes. More...

 #include <QByteArray>

Inherited by Q3CString.

Note: All the functions in this class are reentrant.

[править] Открытые функции

[править] Статические открытые члены

  • QByteArray fromBase64 ( const QByteArray & base64 )
  • QByteArray fromHex ( const QByteArray & hexEncoded )
  • QByteArray fromRawData ( const char * data, int size )
  • QByteArray number ( int n, int base = 10 )
  • QByteArray number ( uint n, int base = 10 )
  • QByteArray number ( qlonglong n, int base = 10 )
  • QByteArray number ( qulonglong n, int base = 10 )
  • QByteArray number ( double n, char f = 'g', int prec = 6 )

[править] Связанные не-члены

  • quint16 qChecksum ( const char * data, uint len )
  • QByteArray qCompress ( const QByteArray & data, int compressionLevel = -1 )
  • QByteArray qCompress ( const uchar * data, int nbytes, int compressionLevel = -1 )
  • QByteArray qUncompress ( const QByteArray & data )
  • QByteArray qUncompress ( const uchar * data, int nbytes )
  • int qsnprintf ( char * str, size_t n, const char * fmt, ... )
  • int qstrcmp ( const char * str1, const char * str2 )
  • char * qstrcpy ( char * dst, const char * src )
  • char * qstrdup ( const char * src )
  • int qstricmp ( const char * str1, const char * str2 )
  • uint qstrlen ( const char * str )
  • int qstrncmp ( const char * str1, const char * str2, uint len )
  • char * qstrncpy ( char * dst, const char * src, uint len )
  • int qstrnicmp ( const char * str1, const char * str2, uint len )
  • uint qstrnlen ( const char * str, uint maxlen )
  • int qvsnprintf ( char * str, size_t n, const char * fmt, va_list ap )
  • bool operator!= ( const QByteArray & a1, const QByteArray & a2 )
  • bool operator!= ( const QByteArray & a1, const char * a2 )
  • bool operator!= ( const char * a1, const QByteArray & a2 )
  • const QByteArray operator+ ( const QByteArray & a1, const QByteArray & a2 )
  • const QByteArray operator+ ( const QByteArray & a1, const char * a2 )
  • const QByteArray operator+ ( const QByteArray & a1, char a2 )
  • const QByteArray operator+ ( const char * a1, const QByteArray & a2 )
  • const QByteArray operator+ ( char a1, const QByteArray & a2 )
  • bool operator< ( const QByteArray & a1, const QByteArray & a2 )
  • bool operator< ( const QByteArray & a1, const char * a2 )
  • bool operator< ( const char * a1, const QByteArray & a2 )
  • QDataStream & operator<< ( QDataStream & out, const QByteArray & ba )
  • bool operator<= ( const QByteArray & a1, const QByteArray & a2 )
  • bool operator<= ( const QByteArray & a1, const char * a2 )
  • bool operator<= ( const char * a1, const QByteArray & a2 )
  • bool operator== ( const QByteArray & a1, const QByteArray & a2 )
  • bool operator== ( const QByteArray & a1, const char * a2 )
  • bool operator== ( const char * a1, const QByteArray & a2 )
  • bool operator> ( const QByteArray & a1, const QByteArray & a2 )
  • bool operator> ( const QByteArray & a1, const char * a2 )
  • bool operator> ( const char * a1, const QByteArray & a2 )
  • bool operator>= ( const QByteArray & a1, const QByteArray & a2 )
  • bool operator>= ( const QByteArray & a1, const char * a2 )
  • bool operator>= ( const char * a1, const QByteArray & a2 )
  • QDataStream & operator>> ( QDataStream & in, QByteArray & ba )

[править] Подробное описание

The QByteArray class provides an array of bytes.

QByteArray can be used to store both raw bytes (including '\0's) and traditional 8-bit '\0'-terminated strings. Using QByteArray is much more convenient than using const char *. Behind the scenes, it always ensures that the data is followed by a '\0' terminator, and uses implicit sharing (copy-on-write) to reduce memory usage and avoid needless copying of data.

In addition to QByteArray, Qt also provides the QString class to store string data. For most purposes, QString is the class you want to use. It stores 16-bit Unicode characters, making it easy to store non-ASCII/non-Latin-1 characters in your application. Furthermore, QString is used throughout in the Qt API. The two main cases where QByteArray is appropriate are when you need to store raw binary data, and when memory conservation is critical (e.g. with Qtopia Core).

One way to initialize a QByteArray is simply to pass a const char * to its constructor. For example, the following code creates a byte array of size 5 containing the data "Hello":

 QByteArray ba("Hello");

Although the size() is 5, the byte array also maintains an extra '\0' character at the end so that if a function is used that asks for a pointer to the underlying data (e.g. a call to data()), the data pointed to is guaranteed to be '\0'-terminated.

QByteArray makes a deep copy of the const char * data, so you can modify it later without experiencing side effects. (If for performance reasons you don't want to take a deep copy of the character data, use QByteArray::fromRawData() instead.)

Another approach is to set the size of the array using resize() and to initialize the data byte per byte. QByteArray uses 0-based indexes, just like C++ arrays. To access the byte at a particular index position, you can use operator[](). On non-const byte arrays, operator[]() returns a reference to a byte that can be used on the left side of an assignment. For example:

 QByteArray ba;
 ba.resize(5);
 ba[0] = 0x3c;
 ba[1] = 0xb8;
 ba[2] = 0x64;
 ba[3] = 0x18;
 ba[4] = 0xca;

For read-only access, an alternative syntax is to use at():

 for (int i = 0; i < ba.size(); ++i) {
     if (ba.at(i) >= 'a' &amp;&amp; ba.at(i) <= 'f')
         cout << "Found character in range [a-f]" << endl;
 }

at() can be faster than operator[](), because it never causes a deep copy to occur.

To extract many bytes at a time, use left(), right(), or mid().

A QByteArray can embed '\0' bytes. The size() function always returns the size of the whole array, including embedded '\0' bytes. If you want to obtain the length of the data up to and excluding the first '\0' character, call qstrlen() on the byte array.

After a call to resize(), newly allocated bytes have undefined values. To set all the bytes to a particular value, call fill().

To obtain a pointer to the actual character data, call data() or constData(). These functions return a pointer to the beginning of the data. The pointer is guaranteed to remain valid until a non-const function is called on the QByteArray. It is also guaranteed that the data ends with a '\0' byte. This '\0' byte is automatically provided by QByteArray and is not counted in size().

QByteArray provides the following basic functions for modifying the byte data: append(), prepend(), insert(), replace(), and remove(). For example:

 QByteArray x("and");
 x.prepend("rock ");         // x == "rock and"
 x.append(" roll");          // x == "rock and roll"
 x.replace(5, 3, "&amp;");       // x == "rock &amp; roll"

The replace() and remove() functions' first two arguments are the position from which to start erasing and the number of bytes that should be erased.

When you append() data to a non-empty array, the array will be reallocated and the new data copied to it. You can avoid this behavior by calling reserve(), which preallocates a certain amount of memory. You can also call capacity() to find out how much memory QByteArray actually allocated. Data appended to an empty array is not copied.

A frequent requirement is to remove whitespace characters from a byte array ('\n', '\t', ' ', etc.). If you want to remove whitespace from both ends of a QByteArray, use trimmed(). If you want to remove whitespace from both ends and replace multiple consecutive whitespaces with a single space character within the byte array, use simplified().

If you want to find all occurrences of a particular character or substring in a QByteArray, use indexOf() or lastIndexOf(). The former searches forward starting from a given index position, the latter searches backward. Both return the index position of the character or substring if they find it; otherwise, they return -1. For example, here's a typical loop that finds all occurrences of a particular substring:

 QByteArray ba("We must be <b>bold</b>, very <b>bold</b>");
 int j = 0;
 while ((j = ba.indexOf("<b>", j)) != -1) {
     cout << "Found <b> tag at index position " << j << endl;
     ++j;
 }

If you simply want to check whether a QByteArray contains a particular character or substring, use contains(). If you want to find out how many times a particular character or substring occurs in the byte array, use count(). If you want to replace all occurrences of a particular value with another, use one of the two-parameter replace() overloads.

QByteArrays can be compared using overloaded operators such as operator<(), operator<=(), operator==(), operator>=(), and so on. The comparison is based exclusively on the numeric values of the characters and is very fast, but is not what a human would expect. QString::localeAwareCompare() is a better choice for sorting user-interface strings.

For historical reasons, QByteArray distinguishes between a null byte array and an empty byte array. A null byte array is a byte array that is initialized using QByteArray's default constructor or by passing (const char *)0 to the constructor. An empty byte array is any byte array with size 0. A null byte array is always empty, but an empty byte array isn't necessarily null:

 QByteArray().isNull();          // returns true
 QByteArray().isEmpty();         // returns true
 
 QByteArray("").isNull();        // returns false
 QByteArray("").isEmpty();       // returns true
 
 QByteArray("abc").isNull();     // returns false
 QByteArray("abc").isEmpty();    // returns false

All functions except isNull() treat null byte arrays the same as empty byte arrays. For example, data() returns a pointer to a '\0' character for a null byte array (not a null pointer), and QByteArray() compares equal to QByteArray(""). We recommend that you always use isEmpty() and avoid isNull().

[править] Note on 8-bit Character Comparisons

In QByteArray, the notion of uppercase and lowercase and of which character is greater than or less than another character is locale dependent. This affects functions that support a case insensitive option or that compare or lowercase or uppercase their arguments. Case insensitive operations and comparisons will be accurate if both strings contain only ASCII characters. (If $LC_CTYPE is set, most Unix systems do "the right thing".) Functions that this affects include contains(), indexOf(), lastIndexOf(), operator<(), operator<=(), operator>(), operator>=(), toLower() and toUpper().

This issue does not apply to QStrings since they represent characters using Unicode.

See also QString and QBitArray.


[править] Описание функций-членов

[править]
QByteArray::QByteArray ()

Constructs an empty byte array.

See also isEmpty().

[править]
QByteArray::QByteArray ( const char * str )

Constructs a byte array initialized with the string str.

QByteArray makes a deep copy of the string data.

[править]
QByteArray::QByteArray ( const char * data, int size )

Constructs a byte array containing the first size bytes of array data.

If data is 0, a null byte array is constructed.

QByteArray makes a deep copy of the string data.

See also fromRawData().

[править]
QByteArray::QByteArray ( int size, char ch )

Constructs a byte array of size size with every byte set to character ch.

See also fill().

[править]
QByteArray::QByteArray ( const QByteArray & other )

Constructs a copy of other.

This operation takes constant time, because QByteArray is implicitly shared. This makes returning a QByteArray from a function very fast. If a shared instance is modified, it will be copied (copy-on-write), and that takes linear time.

See also operator=().

[править]
QByteArray::~QByteArray ()

Destroys the byte array.

[править]
QByteArray & QByteArray::append ( const QByteArray & ba )

Appends the byte array ba onto the end of this byte array.

Example:

 QByteArray x("free");
 QByteArray y("dom");
 x.append(y);
 // x == "freedom"

This is the same as insert( size(), ba).

This operation is typically very fast ( constant time), because QByteArray preallocates extra space at the end of the character data so it can grow without reallocating the entire data each time.

See also operator+=(), prepend(), and insert().

[править]
QByteArray & QByteArray::append ( const QString & str )

This is an overloaded member function, provided for convenience.

Appends the string str to this byte array. The Unicode data is converted into 8-bit characters using QString::toAscii().

If the QString contains non-ASCII Unicode characters, using this function can lead to loss of information. You can disable this function by defining QT_NO_CAST_TO_ASCII when you compile your applications. You then need to call QString::toAscii() (or QString::toLatin1() or QString::toUtf8() or QString::toLocal8Bit()) explicitly if you want to convert the data to const char *.

[править]
QByteArray & QByteArray::append ( const char * str )

This is an overloaded member function, provided for convenience.

Appends the string str to this byte array.

[править]
QByteArray & QByteArray::append ( char ch )

This is an overloaded member function, provided for convenience.

Appends the character ch to this byte array.

[править]
const char QByteArray::at ( int i ) const

Returns the character at index position i in the byte array.

i must be a valid index position in the byte array (i.e., 0 <= i < size()).

See also operator[ ] ().

[править]
int QByteArray::capacity () const

Returns the maximum number of bytes that can be stored in the byte array without forcing a reallocation.

The sole purpose of this function is to provide a means of fine tuning QByteArray's memory usage. In general, you will rarely ever need to call this function. If you want to know how many bytes are in the byte array, call size().

See also reserve() and squeeze().

[править]
void QByteArray::chop ( int n )

Removes n bytes from the end of the byte array.

If n is greater than size(), the result is an empty byte array.

Example:

 QByteArray ba("STARTTLS\r\n");
 ba.chop(2);                 // ba == "STARTTLS"

See also truncate(), resize(), and left().

[править]
void QByteArray::clear ()

Clears the contents of the byte array and makes it empty.

See also resize() and isEmpty().

[править]
const char * QByteArray::constData () const

Returns a pointer to the data stored in the byte array. The pointer can be used to access the bytes that compose the array. The data is '\0'-terminated. The pointer remains valid as long as the byte array isn't reallocated.

This function is mostly useful to pass a byte array to a function that accepts a const char *.

Note: A QByteArray can store any byte values including '\0's, but most functions that take char * arguments assume that the data ends at the first '\0' they encounter.

See also data() and operator[ ] ().

[править]
bool QByteArray::contains ( const QByteArray & ba ) const

Returns true if the byte array contains an occurrence of the byte array ba; otherwise returns false.

See also indexOf() and count().

[править]
bool QByteArray::contains ( const char * str ) const

This is an overloaded member function, provided for convenience.

Returns true if the byte array contains the string str; otherwise returns false.

[править]
bool QByteArray::contains ( char ch ) const

This is an overloaded member function, provided for convenience.

Returns true if the byte array contains the character ch; otherwise returns false.

[править]
int QByteArray::count ( const QByteArray & ba ) const

Returns the number of (potentially overlapping) occurrences of byte array ba in this byte array.

See also contains() and indexOf().

[править]
int QByteArray::count ( const char * str ) const

This is an overloaded member function, provided for convenience.

Returns the number of (potentially overlapping) occurrences of string str in the byte array.

[править]
int QByteArray::count ( char ch ) const

This is an overloaded member function, provided for convenience.

Returns the number of occurrences of character ch in the byte array.

See also contains() and indexOf().

[править]
int QByteArray::count () const

This is an overloaded member function, provided for convenience.

Same as size().

[править]
char * QByteArray::data ()

Returns a pointer to the data stored in the byte array. The pointer can be used to access and modify the bytes that compose the array. The data is '\0'-terminated.

Example:

 QByteArray ba("Hello world");
 char *data = ba.data();
 while (*data) {
     cout << "[" << *data << "]" << endl;
     ++data;
 }

The pointer remains valid as long as the byte array isn't reallocated. For read-only access, constData() is faster because it never causes a deep copy to occur.

This function is mostly useful to pass a byte array to a function that accepts a const char *.

Note: A QByteArray can store any byte values including '\0's, but most functions that take char * arguments assume that the data ends at the first '\0' they encounter.

See also constData() and operator[ ] ().

[править]
const char * QByteArray::data () const

This is an overloaded member function, provided for convenience.

[править]
bool QByteArray::endsWith ( const QByteArray & ba ) const

Returns true if this byte array ends with byte array ba; otherwise returns false.

Example:

 QByteArray url("http://www.trolltech.com/index.html");
 if (url.endsWith(".html"))
     ...

See also startsWith() and right().

[править]
bool QByteArray::endsWith ( const char * str ) const

This is an overloaded member function, provided for convenience.

Returns true if this byte array ends with string str; otherwise returns false.

[править]
bool QByteArray::endsWith ( char ch ) const

This is an overloaded member function, provided for convenience.

Returns true if this byte array ends with character ch; otherwise returns false.

[править]
QByteArray & QByteArray::fill ( char ch, int size = -1 )

Sets every byte in the byte array to character ch. If size is different from -1 (the default), the byte array is resized to size size beforehand.

Example:

 QByteArray ba("Istambul");
 ba.fill('o');
 // ba == "oooooooo"
 
 ba.fill('X', 2);
 // ba == "XX"

See also resize().

[править]
QByteArray QByteArray::fromBase64 ( const QByteArray & base64 ) [static]

Returns a decoded copy of the Base64 array base64. Input is not checked for validity; invalid characters in the input are skipped, enabling the decoding process to continue with subsequent characters.

For example:

 QByteArray text = QByteArray::fromBase64("UXQgaXMgZ3JlYXQh");
 text.data();            // returns "Qt is great!"

The algorithm used to decode Base64-encoded data is defined in RFC 2045.

See also toBase64().

[править]
QByteArray QByteArray::fromHex ( const QByteArray & hexEncoded ) [static]

Returns a decoded copy of the hex encoded array hexEncoded. Input is not checked for validity; invalid characters in the input are skipped, enabling the decoding process to continue with subsequent characters.

For example:

 QByteArray text = QByteArray::fromHex("517420697320677265617421");
 text.data();            // returns "Qt is great!"

See also toHex().

[править]
QByteArray QByteArray::fromRawData ( const char * data, int size ) [static]

Constructs a QByteArray that uses the first size characters in the array data. The bytes in data are not copied. The caller must be able to guarantee that data will not be deleted or modified as long as the QByteArray (or an unmodified copy of it) exists.

Any attempts to modify the QByteArray or copies of it will cause it to create a deep copy of the data, ensuring that the raw data isn't modified.

Here's an example of how we can read data using a QDataStream on raw data in memory without requiring to copy the data into a QByteArray:

  static const char mydata[] = {
     0x00, 0x00, 0x03, 0x84, 0x78, 0x9c, 0x3b, 0x76,
     0xec, 0x18, 0xc3, 0x31, 0x0a, 0xf1, 0xcc, 0x99,
     ...
     0x6d, 0x5b
 };
 
 QByteArray data = QByteArray::fromRawData(mydata, sizeof(mydata));
 QDataStream in(&amp;data, QIODevice::ReadOnly);
 ...

Warning: A byte array created with fromRawData() is not null-terminated, unless the raw data contains a 0 character at position size. While that does not matter for QDataStream or functions like indexOf(), passing the byte array to a function that accepts a const char * and expects it to be '\0'-terminated leads into trouble.

See also data() and constData().

[править]
int QByteArray::indexOf ( const QByteArray & ba, int from = 0 ) const

Returns the index position of the first occurrence of the byte array ba in this byte array, searching forward from index position from. Returns -1 if ba could not be found.

Example:

 QByteArray x("sticky question");
 QByteArray y("sti");
 x.indexOf(y);               // returns 0
 x.indexOf(y, 1);            // returns 10
 x.indexOf(y, 10);           // returns 10
 x.indexOf(y, 11);           // returns -1

See also lastIndexOf(), contains(), and count().

[править]
int QByteArray::indexOf ( const QString & str, int from = 0 ) const

This is an overloaded member function, provided for convenience.

Returns the index position of the first occurrence of the string str in the byte array, searching forward from index position from. Returns -1 if str could not be found.

The Unicode data is converted into 8-bit characters using QString::toAscii().

If the QString contains non-ASCII Unicode characters, using this function can lead to loss of information. You can disable this function by defining QT_NO_CAST_TO_ASCII when you compile your applications. You then need to call QString::toAscii() (or QString::toLatin1() or QString::toUtf8() or QString::toLocal8Bit()) explicitly if you want to convert the data to const char *.

[править]
int QByteArray::indexOf ( const char * str, int from = 0 ) const

This is an overloaded member function, provided for convenience.

Returns the index position of the first occurrence of the string str in the byte array, searching forward from index position from. Returns -1 if str could not be found.

[править]
int QByteArray::indexOf ( char ch, int from = 0 ) const

This is an overloaded member function, provided for convenience.

Returns the index position of the first occurrence of the character ch in the byte array, searching forward from index position from. Returns -1 if ch could not be found.

Example:

 QByteArray ba("ABCBA");
 ba.indexOf("B");            // returns 1
 ba.indexOf("B", 1);         // returns 1
 ba.indexOf("B", 2);         // returns 3
 ba.indexOf("X");            // returns -1

See also lastIndexOf() and contains().

[править]
QByteArray & QByteArray::insert ( int i, const QByteArray & ba )

Inserts the byte array ba at index position i and returns a reference to this byte array.

Example:

 QByteArray ba("Meal");
 ba.insert(1, QByteArray("ontr"));
 // ba == "Montreal"

See also append(), prepend(), replace(), and remove().

[править]
QByteArray & QByteArray::insert ( int i, const QString & str )

This is an overloaded member function, provided for convenience.

Inserts the string str at index position i in the byte array. The Unicode data is converted into 8-bit characters using QString::toAscii().

If i is greater than size(), the array is first extended using resize().

If the QString contains non-ASCII Unicode characters, using this function can lead to loss of information. You can disable this function by defining QT_NO_CAST_TO_ASCII when you compile your applications. You then need to call QString::toAscii() (or QString::toLatin1() or QString::toUtf8() or QString::toLocal8Bit()) explicitly if you want to convert the data to const char *.

[править]
QByteArray & QByteArray::insert ( int i, const char * str )

This is an overloaded member function, provided for convenience.

Inserts the string str at position i in the byte array.

If i is greater than size(), the array is first extended using resize().

[править]
QByteArray & QByteArray::insert ( int i, char ch )

This is an overloaded member function, provided for convenience.

Inserts character ch at index position i in the byte array. If i is greater than size(), the array is first extended using resize().

[править]
bool QByteArray::isEmpty () const

Returns true if the byte array has size 0; otherwise returns false.

Example:

 QByteArray().isEmpty();         // returns true
 QByteArray("").isEmpty();       // returns true
 QByteArray("abc").isEmpty();    // returns false

See also size().

[править]
bool QByteArray::isNull () const

Returns true if this byte array is null; otherwise returns false.

Example:

 QByteArray().isNull();          // returns true
 QByteArray("").isNull();        // returns false
 QByteArray("abc").isNull();     // returns false

Qt makes a distinction between null byte arrays and empty byte arrays for historical reasons. For most applications, what matters is whether or not a byte array contains any data, and this can be determined using isEmpty().

See also isEmpty().

[править]
int QByteArray::lastIndexOf ( const QByteArray & ba, int from = -1 ) const

Returns the index position of the last occurrence of the byte array ba in this byte array, searching backward from index position from. If from is -1 (the default), the search starts at the last byte. Returns -1 if ba could not be found.

Example:

 QByteArray x("crazy azimuths");
 QByteArray y("azy");
 x.lastIndexOf(y);           // returns 6
 x.lastIndexOf(y, 6);        // returns 6
 x.lastIndexOf(y, 5);        // returns 2
 x.lastIndexOf(y, 1);        // returns -1

See also indexOf(), contains(), and count().

[править]
int QByteArray::lastIndexOf ( const QString & str, int from = -1 ) const

This is an overloaded member function, provided for convenience.

Returns the index position of the last occurrence of the string str in the byte array, searching backward from index position from. If from is -1 (the default), the search starts at the last ( size() - 1) byte. Returns -1 if str could not be found.

The Unicode data is converted into 8-bit characters using QString::toAscii().

If the QString contains non-ASCII Unicode characters, using this function can lead to loss of information. You can disable this function by defining QT_NO_CAST_TO_ASCII when you compile your applications. You then need to call QString::toAscii() (or QString::toLatin1() or QString::toUtf8() or QString::toLocal8Bit()) explicitly if you want to convert the data to const char *.

[править]
int QByteArray::lastIndexOf ( const char * str, int from = -1 ) const

This is an overloaded member function, provided for convenience.

Returns the index position of the last occurrence of the string str in the byte array, searching backward from index position from. If from is -1 (the default), the search starts at the last ( size() - 1) byte. Returns -1 if str could not be found.

[править]
int QByteArray::lastIndexOf ( char ch, int from = -1 ) const

This is an overloaded member function, provided for convenience.

Returns the index position of the last occurrence of character ch in the byte array, searching backward from index position from. If from is -1 (the default), the search starts at the last ( size() - 1) byte. Returns -1 if ch could not be found.

Example:

 QByteArray ba("ABCBA");
 ba.lastIndexOf("B");        // returns 3
 ba.lastIndexOf("B", 3);     // returns 3
 ba.lastIndexOf("B", 2);     // returns 1
 ba.lastIndexOf("X");        // returns -1

See also indexOf() and contains().

[править]
QByteArray QByteArray::left ( int len ) const

Returns a byte array that contains the leftmost len bytes of this byte array.

The entire byte array is returned if len is greater than size().

Example:

 QByteArray x("Pineapple");
 QByteArray y = x.left(4);
 // y == "Pine"

See also right(), mid(), startsWith(), and truncate().

[править]
QByteArray QByteArray::leftJustified ( int width, char fill = ' ', bool truncate = false ) const

Returns a byte array of size width that contains this byte array padded by the fill character.

If truncate is false and the size() of the byte array is more than width, then the returned byte array is a copy of this byte array.

If truncate is true and the size() of the byte array is more than width, then any bytes in a copy of the byte array after position width are removed, and the copy is returned.

Example:

 QByteArray x("apple");
 QByteArray y = x.leftJustified(8, '.');   // y == "apple..."

See also rightJustified().

[править]
int QByteArray::length () const

Same as size().

[править]
QByteArray QByteArray::mid ( int pos, int len = -1 ) const

Returns a byte array containing len bytes from this byte array, starting at position pos.

If len is -1 (the default), or pos + len >= size(), returns a byte array containing all bytes starting at position pos until the end of the byte array.

Example:

 QByteArray x("Five pineapples");
 QByteArray y = x.mid(5, 4);     // y == "pine"
 QByteArray z = x.mid(5);        // z == "pineapples"

See also left() and right().

[править]
QByteArray QByteArray::number ( int n, int base = 10 ) [static]

Returns a byte array containing the string equivalent of the number n to base base (10 by default). The base can be any value between 2 and 36.

Example:

 int n = 63;
 QByteArray::number(n);              // returns "63"
 QByteArray::number(n, 16);          // returns "3f"
 QByteArray::number(n, 16).toUpper();  // returns "3F"

See also setNum() and toInt().

[править]
QByteArray QByteArray::number ( uint n, int base = 10 ) [static]

This is an overloaded member function, provided for convenience.

See also toUInt().

[править]
QByteArray QByteArray::number ( qlonglong n, int base = 10 ) [static]

This is an overloaded member function, provided for convenience.

See also toLongLong().

[править]
QByteArray QByteArray::number ( qulonglong n, int base = 10 ) [static]

This is an overloaded member function, provided for convenience.

See also toULongLong().

[править]
QByteArray QByteArray::number ( double n, char f = 'g', int prec = 6 ) [static]

This is an overloaded member function, provided for convenience.

Returns a byte array that contains the printed value of n, formatted in format f with precision prec.

Argument n is formatted according to the f format specified, which is g by default, and can be any of the following:


Format Meaning
e -]999
E -]999
f format as [-]9.9
g use e or f format, whichever is the most concise
G use E or f format, whichever is the most concise

With 'e', 'E', and 'f', prec is the number of digits after the decimal point. With 'g' and 'G', prec is the maximum number of significant digits (trailing zeroes are omitted).

 QByteArray ba = QByteArray::number(12.3456, 'E', 3);
 // ba == 1.235E+01

See also toDouble().

[править]
QByteArray & QByteArray::prepend ( const QByteArray & ba )

Prepends the byte array ba to this byte array and returns a reference to this byte array.

Example:

 QByteArray x("ship");
 QByteArray y("air");
 x.prepend(y);
 // x == "airship"

This is the same as insert(0, ba).

See also append() and insert().

[править]
QByteArray & QByteArray::prepend ( const char * str )

This is an overloaded member function, provided for convenience.

Prepends the string str to this byte array.

[править]
QByteArray & QByteArray::prepend ( char ch )

This is an overloaded member function, provided for convenience.

Prepends the character ch to this byte array.

[править]
void QByteArray::push_back ( const QByteArray & other )

This function is provided for STL compatibility. It is equivalent to append(other).

[править]
void QByteArray::push_back ( const char * str )

This is an overloaded member function, provided for convenience.

Same as append(str).

[править]
void QByteArray::push_back ( char ch )

This is an overloaded member function, provided for convenience.

Same as append(ch).

[править]
void QByteArray::push_front ( const QByteArray & other )

This function is provided for STL compatibility. It is equivalent to prepend(other).

[править]
void QByteArray::push_front ( const char * str )

This is an overloaded member function, provided for convenience.

Same as prepend(str).

[править]
void QByteArray::push_front ( char ch )

This is an overloaded member function, provided for convenience.

Same as prepend(ch).

[править]
QByteArray & QByteArray::remove ( int pos, int len )

Removes len bytes from the array, starting at index position pos, and returns a reference to the array.

If pos is out of range, nothing happens. If pos is valid, but pos + len is larger than the size of the array, the array is truncated at position pos.

Example:

 QByteArray ba("Montreal");
 ba.remove(1, 4);
 // ba == "Meal"

See also insert() and replace().

[править]
QByteArray & QByteArray::replace ( int pos, int len, const QByteArray & after )

Replaces len bytes from index position pos with the byte array after, and returns a reference to this byte array.

Example:

 QByteArray x("Say yes!");
 QByteArray y("no");
 x.replace(4, 3, y);
 // x == "Say no!"

See also insert() and remove().

[править]
QByteArray & QByteArray::replace ( int pos, int len, const char * after )

This is an overloaded member function, provided for convenience.

[править]
QByteArray & QByteArray::replace ( const QByteArray & before, const QByteArray & after )

This is an overloaded member function, provided for convenience.

Replaces every occurrence of the byte array before with the byte array after.

Example:

 QByteArray ba("colour behaviour flavour neighbour");
 ba.replace(QByteArray("ou"), QByteArray("o"));
 // ba == "color behavior flavor neighbor"

[править]
QByteArray & QByteArray::replace ( const char * before, const QByteArray & after )

This is an overloaded member function, provided for convenience.

Replaces every occurrence of the string before with the byte array after.

[править]
QByteArray & QByteArray::replace ( const QByteArray & before, const char * after )

This is an overloaded member function, provided for convenience.

Replaces every occurrence of the byte array before with the string after.

[править]
QByteArray & QByteArray::replace ( const QString & before, const QByteArray & after )

This is an overloaded member function, provided for convenience.

Replaces every occurrence of the string before with the byte array after. The Unicode data is converted into 8-bit characters using QString::toAscii().

If the QString contains non-ASCII Unicode characters, using this function can lead to loss of information. You can disable this function by defining QT_NO_CAST_TO_ASCII when you compile your applications. You then need to call QString::toAscii() (or QString::toLatin1() or QString::toUtf8() or QString::toLocal8Bit()) explicitly if you want to convert the data to const char *.

[править]
QByteArray & QByteArray::replace ( const QString & before, const char * after )

This is an overloaded member function, provided for convenience.

Replaces every occurrence of the string before with the string after.

[править]
QByteArray & QByteArray::replace ( const char * before, const char * after )

This is an overloaded member function, provided for convenience.

Replaces every occurrence of the string before with the string after.

[править]
QByteArray & QByteArray::replace ( char before, const QByteArray & after )

This is an overloaded member function, provided for convenience.

Replaces every occurrence of the character before with the byte array after.

[править]
QByteArray & QByteArray::replace ( char before, const QString & after )

This is an overloaded member function, provided for convenience.

Replaces every occurrence of the character before with the string after. The Unicode data is converted into 8-bit characters using QString::toAscii().

If the QString contains non-ASCII Unicode characters, using this function can lead to loss of information. You can disable this function by defining QT_NO_CAST_TO_ASCII when you compile your applications. You then need to call QString::toAscii() (or QString::toLatin1() or QString::toUtf8() or QString::toLocal8Bit()) explicitly if you want to convert the data to const char *.

[править]
QByteArray & QByteArray::replace ( char before, const char * after )

This is an overloaded member function, provided for convenience.

Replaces every occurrence of the character before with the string after.

[править]
QByteArray & QByteArray::replace ( char before, char after )

This is an overloaded member function, provided for convenience.

Replaces every occurrence of the character before with the character after.

[править]
void QByteArray::reserve ( int size )

Attempts to allocate memory for at least size bytes. If you know in advance how large the byte array will be, you can call this function, and if you call resize() often you are likely to get better performance. If size is an underestimate, the worst that will happen is that the QByteArray will be a bit slower.

The sole purpose of this function is to provide a means of fine tuning QByteArray's memory usage. In general, you will rarely ever need to call this function. If you want to change the size of the byte array, call resize().

See also squeeze() and capacity().

[править]
void QByteArray::resize ( int size )

Sets the size of the byte array to size bytes.

If size is greater than the current size, the byte array is extended to make it size bytes with the extra bytes added to the end. The new bytes are uninitialized.

If size is less than the current size, bytes are removed from the end.

See also size().

[править] QByteArray QByteArray::right ( int len ) const

Returns a byte array that contains the rightmost len bytes of this byte array.

The entire byte array is returned if len is greater than size().

Example:

 QByteArray x("Pineapple");
 QByteArray y = x.right(5);
 // y == "apple"

See also endsWith(), left(), and mid().

[править]
QByteArray QByteArray::rightJustified ( int width, char fill = ' ', bool truncate = false ) const

Returns a byte array of size width that contains the fill character followed by this byte array.

If truncate is false and the size of the byte array is more than width, then the returned byte array is a copy of this byte array.

If truncate is true and the size of the byte array is more than width, then the resulting byte array is truncated at position width.

Example:

 QByteArray x("apple");
 QByteArray y = x.rightJustified(8, '.');    // y == "...apple"

See also leftJustified().

[править]
QByteArray & QByteArray::setNum ( int n, int base = 10 )

Sets the byte array to the printed value of n in base base (10 by default) and returns a reference to the byte array. The base can be any value between 2 and 36.

Example:

 QByteArray ba;
 int n = 63;
 ba.setNum(n);           // ba == "63"
 ba.setNum(n, 16);       // ba == "3f"

See also number() and toInt().

[править]
QByteArray & QByteArray::setNum ( uint n, int base = 10 )

This is an overloaded member function, provided for convenience.

See also toUInt().

[править]
QByteArray & QByteArray::setNum ( short n, int base = 10 )

This is an overloaded member function, provided for convenience.

See also toShort().

[править]
QByteArray & QByteArray::setNum ( ushort n, int base = 10 )

This is an overloaded member function, provided for convenience.

See also toUShort().

[править]
QByteArray & QByteArray::setNum ( qlonglong n, int base = 10 )

This is an overloaded member function, provided for convenience.

See also toLongLong().

[править]
QByteArray & QByteArray::setNum ( qulonglong n, int base = 10 )

This is an overloaded member function, provided for convenience.

See also toULongLong().

[править]
QByteArray & QByteArray::setNum ( double n, char f = 'g', int prec = 6 )

This is an overloaded member function, provided for convenience.

Sets the byte array to the printed value of n, formatted in format f with precision prec, and returns a reference to the byte array.

The format f can be any of the following:


Format Meaning
e -]999
E -]999
f format as [-]9.9
g use e or f format, whichever is the most concise
G use E or f format, whichever is the most concise

With 'e', 'E', and 'f', prec is the number of digits after the decimal point. With 'g' and 'G', prec is the maximum number of significant digits (trailing zeroes are omitted).

See also toDouble().

[править]
QByteArray & QByteArray::setNum ( float n, char f = 'g', int prec = 6 )

This is an overloaded member function, provided for convenience.

Sets the byte array to the printed value of n, formatted in format f with precision prec, and returns a reference to the byte array.

See also toFloat().

[править]
QByteArray QByteArray::simplified () const

Returns a byte array that has whitespace removed from the start and the end, and which has each sequence of internal whitespace replaced with a single space.

Whitespace means any character for which the standard C++ isspace() function returns true. This includes the ASCII characters '\t', '\n', '\v', '\f', '\r', and ' '.

Example:

 QByteArray ba("  lots\t of\nwhitespace\r\n ");
 ba = ba.simplified();
 // ba == "lots of whitespace";

See also trimmed().

[править]
int QByteArray::size () const

Returns the number of bytes in this byte array.

The last byte in the byte array is at position size() - 1. In addition, QByteArray ensures that the byte at position size() is always '\0', so that you can use the return value of data() and constData() as arguments to functions that expect '\0'-terminated strings.

Example:

 QByteArray ba("Hello");
 int n = ba.size();          // n == 5
 ba.data()[0];               // returns 'H'
 ba.data()[4];               // returns 'o'
 ba.data()[5];               // returns '\0'

See also isEmpty() and resize().

[править]
QList<QByteArray> QByteArray::split ( char sep ) const

Splits the byte array into subarrays wherever sep occurs, and returns the list of those arrays. If sep does not match anywhere in the byte array, split() returns a single-element list containing this byte array.

[править]
void QByteArray::squeeze ()

Releases any memory not required to store the array's data.

The sole purpose of this function is to provide a means of fine tuning QByteArray's memory usage. In general, you will rarely ever need to call this function.

See also reserve() and capacity().

[править]
bool QByteArray::startsWith ( const QByteArray & ba ) const

Returns true if this byte array starts with byte array ba; otherwise returns false.

Example:

 QByteArray url("ftp://ftp.trolltech.com/");
 if (url.startsWith("ftp:"))
     ...

See also endsWith() and left().

[править]
bool QByteArray::startsWith ( const char * str ) const

This is an overloaded member function, provided for convenience.

Returns true if this byte array starts with string str; otherwise returns false.

[править]
bool QByteArray::startsWith ( char ch ) const

This is an overloaded member function, provided for convenience.

Returns true if this byte array starts with character ch; otherwise returns false.

[править]
QByteArray QByteArray::toBase64 () const

Returns a copy of the byte array, encoded as Base64.

 QByteArray text("Qt is great!");
 text.toBase64();        // returns "UXQgaXMgZ3JlYXQh"

The algorithm used to encode Base64-encoded data is defined in RFC 2045.

See also fromBase64().

[править]
double QByteArray::toDouble ( bool * ok = 0 ) const

Returns the byte array converted to a double value.

Returns 0.0 if the conversion fails.

If ok is not 0: if a conversion error occurs, *ok is set to false; otherwise *ok is set to true.

 QByteArray string("1234.56");
 double a = string.toDouble();   // a == 1234.56

See also number().

[править]
float QByteArray::toFloat ( bool * ok = 0 ) const

Returns the byte array converted to a float value.

Returns 0.0 if the conversion fails.

If ok is not 0: if a conversion error occurs, *ok is set to false; otherwise *ok is set to true.

See also number().

[править]
QByteArray QByteArray::toHex () const

Returns a hex encoded copy of the byte array. The hex encoding uses the numbers 0-9 and the letters a-f.

See also fromHex().

[править]
int QByteArray::toInt ( bool * ok = 0, int base = 10 ) const

Returns the byte array converted to an int using base base, which is 10 by default and must be between 2 and 36, or 0.

If base is 0, the base is determined automatically using the following rules: If the byte array begins with "0x", it is assumed to be hexadecimal; if it begins with "0", it is assumed to be octal; otherwise it is assumed to be decimal.

Returns 0 if the conversion fails.

If ok is not 0: if a conversion error occurs, *ok is set to false; otherwise *ok is set to true.

 QByteArray str("FF");
 bool ok;
 int hex = str.toInt(&amp;ok, 16);     // hex == 255, ok == true
 int dec = str.toInt(&amp;ok, 10);     // dec == 0, ok == false

See also number().

[править]
long QByteArray::toLong ( bool * ok = 0, int base = 10 ) const

Returns the byte array converted to a long int using base base, which is 10 by default and must be between 2 and 36, or 0.

If base is 0, the base is determined automatically using the following rules: If the byte array begins with "0x", it is assumed to be hexadecimal; if it begins with "0", it is assumed to be octal; otherwise it is assumed to be decimal.

Returns 0 if the conversion fails.

If ok is not 0: if a conversion error occurs, *ok is set to false; otherwise *ok is set to true.

 QByteArray str("FF");
 bool ok;
 long hex = str.toLong(&amp;ok, 16);   // hex == 255, ok == true
 long dec = str.toLong(&amp;ok, 10);   // dec == 0, ok == false

This function was introduced in Qt 4.1.

See also number().

[править]
qlonglong QByteArray::toLongLong ( bool * ok = 0, int base = 10 ) const

Returns the byte array converted to a long long using base base, which is 10 by default and must be between 2 and 36, or 0.

If base is 0, the base is determined automatically using the following rules: If the byte array begins with "0x", it is assumed to be hexadecimal; if it begins with "0", it is assumed to be octal; otherwise it is assumed to be decimal.

Returns 0 if the conversion fails.

If ok is not 0: if a conversion error occurs, *ok is set to false; otherwise *ok is set to true.

See also number().

[править]
QByteArray QByteArray::toLower () const

Returns a lowercase copy of the byte array. The bytearray is interpreted as a Latin-1 encoded string.

Example:

 QByteArray x("TROlltECH");
 QByteArray y = x.toLower();
 // y == "trolltech"

See also toUpper() and Note on 8-bit character comparisons.

[править]
short QByteArray::toShort ( bool * ok = 0, int base = 10 ) const

Returns the byte array converted to a short using base base, which is 10 by default and must be between 2 and 36, or 0.

If base is 0, the base is determined automatically using the following rules: If the byte array begins with "0x", it is assumed to be hexadecimal; if it begins with "0", it is assumed to be octal; otherwise it is assumed to be decimal.

Returns 0 if the conversion fails.

If ok is not 0: if a conversion error occurs, *ok is set to false; otherwise *ok is set to true.

See also number().

[править]
uint QByteArray::toUInt ( bool * ok = 0, int base = 10 ) const

Returns the byte array converted to an unsigned int using base base, which is 10 by default and must be between 2 and 36, or 0.

If base is 0, the base is determined automatically using the following rules: If the byte array begins with "0x", it is assumed to be hexadecimal; if it begins with "0", it is assumed to be octal; otherwise it is assumed to be decimal.

Returns 0 if the conversion fails.

If ok is not 0: if a conversion error occurs, *ok is set to false; otherwise *ok is set to true.

See also number().

[править]
ulong QByteArray::toULong ( bool * ok = 0, int base = 10 ) const

Returns the byte array converted to an unsigned long int using base base, which is 10 by default and must be between 2 and 36, or 0.

If base is 0, the base is determined automatically using the following rules: If the byte array begins with "0x", it is assumed to be hexadecimal; if it begins with "0", it is assumed to be octal; otherwise it is assumed to be decimal.

Returns 0 if the conversion fails.

If ok is not 0: if a conversion error occurs, *ok is set to false; otherwise *ok is set to true.

This function was introduced in Qt 4.1.

See also number().

[править]
qulonglong QByteArray::toULongLong ( bool * ok = 0, int base = 10 ) const

Returns the byte array converted to an unsigned long long using base base, which is 10 by default and must be between 2 and 36, or 0.

If base is 0, the base is determined automatically using the following rules: If the byte array begins with "0x", it is assumed to be hexadecimal; if it begins with "0", it is assumed to be octal; otherwise it is assumed to be decimal.

Returns 0 if the conversion fails.

If ok is not 0: if a conversion error occurs, *ok is set to false; otherwise *ok is set to true.

See also number().

[править]
ushort QByteArray::toUShort ( bool * ok = 0, int base = 10 ) const

Returns the byte array converted to an unsigned short using base base, which is 10 by default and must be between 2 and 36, or 0.

If base is 0, the base is determined automatically using the following rules: If the byte array begins with "0x", it is assumed to be hexadecimal; if it begins with "0", it is assumed to be octal; otherwise it is assumed to be decimal.

Returns 0 if the conversion fails.

If ok is not 0: if a conversion error occurs, *ok is set to false; otherwise *ok is set to true.

See also number().

[править]
QByteArray QByteArray::toUpper () const

Returns an uppercase copy of the byte array. The bytearray is interpreted as a Latin-1 encoded string.

Example:

 QByteArray x("TROlltECH");
 QByteArray y = x.toUpper();
 // y == "TROLLTECH"

See also toLower() and Note on 8-bit character comparisons.

[править]
QByteArray QByteArray::trimmed () const

Returns a byte array that has whitespace removed from the start and the end.

Whitespace means any character for which the standard C++ isspace() function returns true. This includes the ASCII characters '\t', '\n', '\v', '\f', '\r', and ' '.

Example:

 QByteArray ba("  lots\t of\nwhitespace\r\n ");
 ba = ba.trimmed();
 // ba == "lots\t of\nwhitespace";

Unlike simplified(), trimmed() leaves internal whitespace alone.

See also simplified().

[править]
void QByteArray::truncate ( int pos )

Truncates the byte array at index position pos.

If pos is beyond the end of the array, nothing happens.

Example:

 QByteArray ba("Stockholm");
 ba.truncate(5);             // ba == "Stock"

See also chop(), resize(), and left().

[править]
QByteArray::operator const char * () const

Returns a pointer to the data stored in the byte array. The pointer can be used to access the bytes that compose the array. The data is '\0'-terminated. The pointer remains valid as long as the array isn't reallocated.

This operator is mostly useful to pass a byte array to a function that accepts a const char *.

Note: A QByteArray can store any byte values including '\0's, but most functions that take char * arguments assume that the data ends at the first '\0' they encounter.

See also constData().

[править]
QByteArray::operator const void * () const

Returns a void pointer to the data.

This operator is mostly useful to pass a byte array to a function that accepts a void *.

See also constData().

[править]
bool QByteArray::operator!= ( const QString & str ) const

Returns true if this byte array is not equal to string str; otherwise returns false.

The Unicode data is converted into 8-bit characters using QString::toAscii().

The comparison is case sensitive.

You can disable this operator by defining QT_NO_CAST_FROM_ASCII when you compile your applications. You then need to call QString::fromAscii(), QString::fromLatin1(), QString::fromUtf8(), or QString::fromLocal8Bit() explicitly if you want to convert the byte array to a QString before doing the comparison.

[править]
QByteArray & QByteArray::operator+= ( const QByteArray & ba )

Appends the byte array ba onto the end of this byte array and returns a reference to this byte array.

Example:

 QByteArray x("free");
 QByteArray y("dom");
 x += y;
 // x == "freedom"

This operation is typically very fast ( constant time), because QByteArray preallocates extra space at the end of the character data so it can grow without reallocating the entire data each time.

See also append() and prepend().

[править]
QByteArray & QByteArray::operator+= ( const QString & str )

This is an overloaded member function, provided for convenience.

Appends the string str onto the end of this byte array and returns a reference to this byte array. The Unicode data is converted into 8-bit characters using QString::toAscii().

If the QString contains non-ASCII Unicode characters, using this operator can lead to loss of information. You can disable this operator by defining QT_NO_CAST_TO_ASCII when you compile your applications. You then need to call QString::toAscii() (or QString::toLatin1() or QString::toUtf8() or QString::toLocal8Bit()) explicitly if you want to convert the data to const char *.

[править]
QByteArray & QByteArray::operator+= ( const char * str )

This is an overloaded member function, provided for convenience.

Appends the string str onto the end of this byte array and returns a reference to this byte array.

[править]
QByteArray & QByteArray::operator+= ( char ch )

This is an overloaded member function, provided for convenience.

Appends the character ch onto the end of this byte array and returns a reference to this byte array.

[править]
bool QByteArray::operator< ( const QString & str ) const

Returns true if this byte array is lexically less than string str; otherwise returns false.

The Unicode data is converted into 8-bit characters using QString::toAscii().

The comparison is case sensitive.

You can disable this operator by defining QT_NO_CAST_FROM_ASCII when you compile your applications. You then need to call QString::fromAscii(), QString::fromLatin1(), QString::fromUtf8(), or QString::fromLocal8Bit() explicitly if you want to convert the byte array to a QString before doing the comparison.

[править]
bool QByteArray::operator<= ( const QString & str ) const

Returns true if this byte array is lexically less than or equal to string str; otherwise returns false.

The Unicode data is converted into 8-bit characters using QString::toAscii().

The comparison is case sensitive.

You can disable this operator by defining QT_NO_CAST_FROM_ASCII when you compile your applications. You then need to call QString::fromAscii(), QString::fromLatin1(), QString::fromUtf8(), or QString::fromLocal8Bit() explicitly if you want to convert the byte array to a QString before doing the comparison.

[править]
QByteArray & QByteArray::operator= ( const QByteArray & other )

Assigns other to this byte array and returns a reference to this byte array.

[править]
QByteArray & QByteArray::operator= ( const char * str )

This is an overloaded member function, provided for convenience.

Assigns str to this byte array.

[править]
bool QByteArray::operator== ( const QString & str ) const

Returns true if this byte array is equal to string str; otherwise returns false.

The Unicode data is converted into 8-bit characters using QString::toAscii().

The comparison is case sensitive.

You can disable this operator by defining QT_NO_CAST_FROM_ASCII when you compile your applications. You then need to call QString::fromAscii(), QString::fromLatin1(), QString::fromUtf8(), or QString::fromLocal8Bit() explicitly if you want to convert the byte array to a QString before doing the comparison.

[править]
bool QByteArray::operator> ( const QString & str ) const

Returns true if this byte array is lexically greater than string str; otherwise returns false.

The Unicode data is converted into 8-bit characters using QString::toAscii().

The comparison is case sensitive.

You can disable this operator by defining QT_NO_CAST_FROM_ASCII when you compile your applications. You then need to call QString::fromAscii(), QString::fromLatin1(), QString::fromUtf8(), or QString::fromLocal8Bit() explicitly if you want to convert the byte array to a QString before doing the comparison.

[править]
bool QByteArray::operator>= ( const QString & str ) const

Returns true if this byte array is greater than or equal to string str; otherwise returns false.

The Unicode data is converted into 8-bit characters using QString::toAscii().

The comparison is case sensitive.

You can disable this operator by defining QT_NO_CAST_FROM_ASCII when you compile your applications. You then need to call QString::fromAscii(), QString::fromLatin1(), QString::fromUtf8(), or QString::fromLocal8Bit() explicitly if you want to convert the byte array to a QString before doing the comparison.

[править]
QByteRef QByteArray::operator[] ( int i )

Returns the byte at index position i as a modifiable reference.

If an assignment is made beyond the end of the byte array, the array is extended with resize() before the assignment takes place.

Example:

 QByteArray ba;
 for (int i = 0; i < 10; ++i)
     ba[i] = 'A' + i;
 // ba == "ABCDEFGHIJ"

The return value is of type QByteRef, a helper class for QByteArray. When you get an object of type QByteRef, you can use it as if it were a char &. If you assign to it, the assignment will apply to the character in the QByteArray from which you got the reference.

See also at().

[править]
const char QByteArray::operator[] ( int i ) const

This is an overloaded member function, provided for convenience.

Same as at(i).

[править]
QByteRef QByteArray::operator[] ( uint i )

This is an overloaded member function, provided for convenience.

[править]
const char QByteArray::operator[] ( uint i ) const

This is an overloaded member function, provided for convenience.


[править] Связанные не-члены

[править]
quint16 qChecksum ( const char * data, uint len )

Returns the CRC-16 checksum of the first len bytes of data.

The checksum is independent of the byte order (endianness).

[править]
QByteArray qCompress ( const QByteArray & data, int compressionLevel = -1 )

Compresses the data byte array and returns the compressed data in a new byte array.

The compressionLevel parameter specifies how much compression should be used. Valid values are between 0 and 9, with 9 corresponding to the greatest compression (i.e. smaller compressed data) at the cost of using a slower algorithm. Smaller values (8, 7, ..., 1) provide successively less compression at slightly faster speeds. The value 0 corresponds to no compression at all. The default value is -1, which specifies zlib's default compression.

See also qUncompress().

[править]
QByteArray qCompress ( const uchar * data, int nbytes, int compressionLevel = -1 )

This is an overloaded member function, provided for convenience.

Compresses the first nbytes of data and returns the compressed data in a new byte array.

[править]
QByteArray qUncompress ( const QByteArray & data )

Uncompresses the data byte array and returns a new byte array with the uncompressed data.

Returns an empty QByteArray if the input data was corrupt.

This function will uncompress data compressed with qCompress() from this and any earlier Qt version, back to Qt 3.1 when this feature was added.

Note: If you want to use this function to uncompress external data compressed using zlib, you first need to prepend four bytes to the byte array that contain the expected length of the uncompressed data encoded in big-endian order (most significant byte first).

See also qCompress().

[править]
QByteArray qUncompress ( const uchar * data, int nbytes )

This is an overloaded member function, provided for convenience.

Uncompresses the first nbytes of data and returns a new byte array with the uncompressed data.

[править]
int qsnprintf ( char * str, size_t n, const char * fmt, ... )

A portable snprintf() function, calls qvsnprintf.

fmt is the printf() format string. The result is put into str, which is a buffer of at least n bytes.

Warning: Call this function only when you know what you are doing since it shows different behavior on certain platforms. Use QString::sprintf() to format a string instead.

See also qvsnprintf() and QString::sprintf().

[править]
int qstrcmp ( const char * str1, const char * str2 )

A safe strcmp() function.

Compares str1 and str2. Returns a negative value if str1 is less than str2, 0 if str1 is equal to str2 or a positive value if str1 is greater than str2.

Special case 1: Returns 0 if str1 and str2 are both 0.

Special case 2: Returns an arbitrary non-zero value if str1 is 0 or str2 is 0 (but not both).

See also qstrncmp(), qstricmp(), qstrnicmp(), and Note on 8-bit character comparisons.

[править]
char * qstrcpy ( char * dst, const char * src )

Copies all the characters up to and including the '\0' from src into dst and returns a pointer to dst. If src is 0, it immediately returns 0.

This function assumes that dst is large enough to hold the contents of src.

See also qstrncpy().

[править]
char * qstrdup ( const char * src )

Returns a duplicate string.

Allocates space for a copy of src, copies it, and returns a pointer to the copy. If src is 0, it immediately returns 0.

Ownership is passed to the caller, so the returned string must be deleted using delete[].

[править]
int qstricmp ( const char * str1, const char * str2 )

A safe stricmp() function.

Compares str1 and str2 ignoring the case of the characters. The encoding of the strings is assumed to be Latin-1.

Returns a negative value if str1 is less than str2, 0 if str1 is equal to str2 or a positive value if str1 is greater than str2.

Special case 1: Returns 0 if str1 and str2 are both 0.

Special case 2: Returns a random non-zero value if str1 is 0 or str2 is 0 (but not both).

See also qstrcmp(), qstrncmp(), qstrnicmp(), and Note on 8-bit character comparisons.

[править]
uint qstrlen ( const char * str )

A safe strlen() function.

Returns the number of characters that precede the terminating '\0', or 0 if str is 0.

See also qstrnlen().

[править]
int qstrncmp ( const char * str1, const char * str2, uint len )

A safe strncmp() function.

Compares at most len bytes of str1 and str2.

Returns a negative value if str1 is less than str2, 0 if str1 is equal to str2 or a positive value if str1 is greater than str2.

Special case 1: Returns 0 if str1 and str2 are both 0.

Special case 2: Returns a random non-zero value if str1 is 0 or str2 is 0 (but not both).

See also qstrcmp(), qstricmp(), qstrnicmp(), and Note on 8-bit character comparisons.

[править]
char * qstrncpy ( char * dst, const char * src, uint len )

A safe strncpy() function.

Copies at most len bytes from src (stopping at len or the terminating '\0' whichever comes first) into dst and returns a pointer to dst. Guarantees that dst is '\0'-terminated. If src or dst is 0, returns 0 immediately.

This function assumes that dst is at least len characters long.

See also qstrcpy().

[править]
int qstrnicmp ( const char * str1, const char * str2, uint len )

A safe strnicmp() function.

Compares at most len bytes of str1 and str2 ignoring the case of the characters. The encoding of the strings is assumed to be Latin-1.

Returns a negative value if str1 is less than str2, 0 if str1 is equal to str2 or a positive value if str1 is greater than str2.

Special case 1: Returns 0 if str1 and str2 are both 0.

Special case 2: Returns a random non-zero value if str1 is 0 or str2 is 0 (but not both).

See also qstrcmp(), qstrncmp(), qstricmp(), and Note on 8-bit character comparisons.

[править]
uint qstrnlen ( const char * str, uint maxlen )

A safe strnlen() function.

Returns the number of characters that precede the terminating '\0', but at most maxlen. If str is 0, returns 0.

This function was introduced in Qt 4.2.

See also qstrlen().

[править]
int qvsnprintf ( char * str, size_t n, const char * fmt, va_list ap )

A portable vsnprintf() function. Will call ::vsnprintf(), ::_vsnprintf(), or ::vsnprintf_s depending on the system, or fall back to an internal version.

fmt is the printf() format string. The result is put into str, which is a buffer of at least n bytes.

The caller is responsible to call va_end() on ap.

Warning: Since vsnprintf() shows different behavior on certain platforms, you should not rely on the return value or on the fact that you will always get a 0 terminated string back.

Ideally, you should never call this function but use QString::sprintf() instead.

See also qsnprintf() and QString::sprintf().

[править]
bool operator!= ( const QByteArray & a1, const QByteArray & a2 )

This is an overloaded member function, provided for convenience.

Returns true if byte array a1 is not equal to byte array a2; otherwise returns false.

[править]
bool operator!= ( const QByteArray & a1, const char * a2 )

This is an overloaded member function, provided for convenience.

Returns true if byte array a1 is not equal to string a2; otherwise returns false.

[править]
bool operator!= ( const char * a1, const QByteArray & a2 )

This is an overloaded member function, provided for convenience.

Returns true if string a1 is not equal to byte array a2; otherwise returns false.

[править]
const QByteArray operator+ ( const QByteArray & a1, const QByteArray & a2 )

Returns a byte array that is the result of concatenating byte array a1 and byte array a2.

See also QByteArray::operator+=().

[править]
const QByteArray operator+ ( const QByteArray & a1, const char * a2 )

This is an overloaded member function, provided for convenience.

Returns a byte array that is the result of concatenating byte array a1 and string a2.

[править]
const QByteArray operator+ ( const QByteArray & a1, char a2 )

This is an overloaded member function, provided for convenience.

Returns a byte array that is the result of concatenating byte array a1 and character a2.

[править]
const QByteArray operator+ ( const char * a1, const QByteArray & a2 )

This is an overloaded member function, provided for convenience.

Returns a byte array that is the result of concatenating string a1 and byte array a2.

[править]
const QByteArray operator+ ( char a1, const QByteArray & a2 )

This is an overloaded member function, provided for convenience.

Returns a byte array that is the result of concatenating character a1 and byte array a2.

[править]
bool operator< ( const QByteArray & a1, const QByteArray & a2 )

This is an overloaded member function, provided for convenience.

Returns true if byte array a1 is lexically less than byte array a2; otherwise returns false.

[править]
bool operator< ( const QByteArray & a1, const char * a2 )

This is an overloaded member function, provided for convenience.

Returns true if byte array a1 is lexically less than string a2; otherwise returns false.

[править]
bool operator< ( const char * a1, const QByteArray & a2 )

This is an overloaded member function, provided for convenience.

Returns true if string a1 is lexically less than byte array a2; otherwise returns false.

[править]
QDataStream & operator<< ( QDataStream & out, const QByteArray & ba )

This is an overloaded member function, provided for convenience.

Writes byte array ba to the stream out and returns a reference to the stream.

See also Format of the QDataStream operators.

[править]
bool operator<= ( const QByteArray & a1, const QByteArray & a2 )

This is an overloaded member function, provided for convenience.

Returns true if byte array a1 is lexically less than or equal to byte array a2; otherwise returns false.

[править]
bool operator<= ( const QByteArray & a1, const char * a2 )

This is an overloaded member function, provided for convenience.

Returns true if byte array a1 is lexically less than or equal to string a2; otherwise returns false.

[править]
bool operator<= ( const char * a1, const QByteArray & a2 )

This is an overloaded member function, provided for convenience.

Returns true if string a1 is lexically less than or equal to byte array a2; otherwise returns false.

[править]
bool operator== ( const QByteArray & a1, const QByteArray & a2 )

This is an overloaded member function, provided for convenience.

Returns true if byte array a1 is equal to byte array a2; otherwise returns false.

[править]
bool operator== ( const QByteArray & a1, const char * a2 )

This is an overloaded member function, provided for convenience.

Returns true if byte array a1 is equal to string a2; otherwise returns false.

[править]
bool operator== ( const char * a1, const QByteArray & a2 )

This is an overloaded member function, provided for convenience.

Returns true if string a1 is equal to byte array a2; otherwise returns false.

[править]
bool operator> ( const QByteArray & a1, const QByteArray & a2 )

This is an overloaded member function, provided for convenience.

Returns true if byte array a1 is lexically greater than byte array a2; otherwise returns false.

[править]
bool operator> ( const QByteArray & a1, const char * a2 )

This is an overloaded member function, provided for convenience.

Returns true if byte array a1 is lexically greater than string a2; otherwise returns false.

[править]
bool operator> ( const char * a1, const QByteArray & a2 )

This is an overloaded member function, provided for convenience.

Returns true if string a1 is lexically greater than byte array a2; otherwise returns false.

[править]
bool operator>= ( const QByteArray & a1, const QByteArray & a2 )

This is an overloaded member function, provided for convenience.

Returns true if byte array a1 is lexically greater than or equal to byte array a2; otherwise returns false.

[править]
bool operator>= ( const QByteArray & a1, const char * a2 )

This is an overloaded member function, provided for convenience.

Returns true if byte array a1 is lexically greater than or equal to string a2; otherwise returns false.

[править]
bool operator>= ( const char * a1, const QByteArray & a2 )

This is an overloaded member function, provided for convenience.

Returns true if string a1 is lexically greater than or equal to byte array a2; otherwise returns false.

[править]
QDataStream & operator>> ( QDataStream & in, QByteArray & ba )

This is an overloaded member function, provided for convenience.

Reads a byte array into ba from the stream in and returns a reference to the stream.

See also Format of the QDataStream operators.


Copyright © 2007 Trolltech Trademarks
Qt 4.3.2