Материал из Wiki.crossplatform.ru

Внимание: Актуальная версия перевода документации находится здесь

__NOTOC__

QPoint Class Reference
^{[модуль QtCore ]}

The QPoint class defines a point in the plane using integer precision. More...

 #include <QPoint>

• Список всех членов включая унаследованные

Открытые функции

• QPoint ()
• QPoint ( int x, int y )
• bool isNull () const
• int manhattanLength () const
• int & rx ()
• int & ry ()
• void setX ( int x )
• void setY ( int y )
• int x () const
• int y () const
• QPoint & operator*= ( qreal factor )
• QPoint & operator+= ( const QPoint & point )
• QPoint & operator-= ( const QPoint & point )
• QPoint & operator/= ( qreal divisor )

Связанные не-члены

• bool operator!= ( const QPoint & p1, const QPoint & p2 )
• const QPoint operator* ( const QPoint & point, qreal factor )
• const QPoint operator* ( qreal factor, const QPoint & point )
• const QPoint operator+ ( const QPoint & p1, const QPoint & p2 )
• const QPoint operator- ( const QPoint & p1, const QPoint & p2 )
• const QPoint operator- ( const QPoint & point )
• const QPoint operator/ ( const QPoint & point, qreal divisor )
• QDataStream & operator<< ( QDataStream & stream, const QPoint & point )
• bool operator== ( const QPoint & p1, const QPoint & p2 )
• QDataStream & operator>> ( QDataStream & stream, QPoint & point )

Подробное описание

The QPoint class defines a point in the plane using integer precision.

A point is specified by a x coordinate and an y coordinate which can be accessed using the x() and y() functions. The isNull() function returns true if both x and y are set to 0. The coordinates can be set (or altered) using the setX() and setY() functions, or alternatively the rx() and ry() functions which return references to the coordinates (allowing direct manipulation).

Given a point p, the following statements are all equivalent:

 QPoint p;
 
 p.setX(p.x() + 1);
 p += QPoint(1, 0);
 p.rx()++;

A QPoint object can also be used as a vector: Addition and subtraction are defined as for vectors (each component is added separately). A QPoint object can also be divided or multiplied by an int or a qreal.

In addition, the QPoint class provides the manhattanLength() function which gives an inexpensive approximation of the length of the QPoint object interpreted as a vector. Finally, QPoint objects can be streamed as well as compared.

See also QPointF and QPolygon.

Описание функций-членов

QPoint::QPoint ()

Constructs a null point, i.e. with coordinates (0, 0)

See also isNull().

QPoint::QPoint ( int x, int y )

Constructs a point with the given coordinates (x, y).

See also setX() and setY().

bool QPoint::isNull () const

Returns true if both the x and y coordinates are set to 0, otherwise returns false.

int QPoint::manhattanLength () const

Возвращает сумму абсолютных значений x() и y(), традиционно известную как «Манхэттенская длинна» (Manhattan length), вектора от начала координат до точки. Например:

 QPoint oldPosition;
 
 MyWidget::mouseMoveEvent(QMouseEvent *event)
 {
     QPoint point = event->pos() - oldPosition;
     if (point.manhattanLength() > 3)
         // the mouse has moved more than 3 pixels since the oldPosition
 }

Функция работает быстро и полезна для вычисления приближённого значения истинной длины:

 int trueManhattenLength = sqrt(pow(x(), 2) + pow(y(), 2));

Её название произошло от того, что такое расстояние проходит путешественник, который может путешествовать только вдоль осей прямоугольной сетки, подобной улицам Манхэттена.

int & QPoint::rx ()

Returns a reference to the x coordinate of this point.

Using a reference makes it possible to directly manipulate x. For example:

 QPoint p(1, 2);
 p.rx()--;   // p becomes (0, 2)

See also x() and setX().

int & QPoint::ry ()

Returns a reference to the y coordinate of this point.

Using a reference makes it possible to directly manipulate y. For example:

 QPoint p(1, 2);
 p.ry()++;   // p becomes (1, 3)

See also y() and setY().

void QPoint::setX ( int x )

Sets the x coordinate of this point to the given x coordinate.

See also x() and setY().

void QPoint::setY ( int y )

Sets the y coordinate of this point to the given y coordinate.

See also y() and setX().

int QPoint::x () const

Returns the x coordinate of this point.

See also setX() and rx().

int QPoint::y () const

Returns the y coordinate of this point.

See also setY() and ry().

QPoint & QPoint::operator*= ( qreal factor )

Multiplies this point's coordinates by the given factor, and returns a reference to this point. For example:

 QPoint p(-1, 4);
 p *= 2.5;    // p becomes (-3, 10)

Note that the result is rounded to the nearest integer as points are held as integers. Use QPointF for floating point accuracy.

See also operator/=().

QPoint & QPoint::operator+= ( const QPoint & point )

Adds the given point to this point and returns a reference to this point. For example:

 QPoint p( 3, 7);
 QPoint q(-1, 4);
 p += q;    // p becomes (2, 11)

See also operator-=().

QPoint & QPoint::operator-= ( const QPoint & point )

Subtracts the given point from this point and returns a reference to this point. For example:

 QPoint p( 3, 7);
 QPoint q(-1, 4);
 p -= q;    // p becomes (4, 3)

See also operator+=().

QPoint & QPoint::operator/= ( qreal divisor )

Divides both x and y by the given divisor, and returns a reference to this point. For example:

 QPoint p(-3, 10);
 p /= 2.5;           // p becomes (-1, 4)

Note that the result is rounded to the nearest integer as points are held as integers. Use QPointF for floating point accuracy.

See also operator*=().

Связанные не-члены

bool operator!= ( const QPoint & p1, const QPoint & p2 )

This is an overloaded member function, provided for convenience.

Returns true if p1 and p2 are not equal; otherwise returns false.

const QPoint operator* ( const QPoint & point, qreal factor )

Returns a copy of the given point multiplied by the given factor.

Note that the result is rounded to the nearest integer as points are held as integers. Use QPointF for floating point accuracy.

See also QPoint::operator*=().

const QPoint operator* ( qreal factor, const QPoint & point )

This is an overloaded member function, provided for convenience.

Returns a copy of the given point multiplied by the given factor.

const QPoint operator+ ( const QPoint & p1, const QPoint & p2 )

This is an overloaded member function, provided for convenience.

Returns a QPoint object that is the sum of the given points, p1 and p2; each component is added separately.

See also QPoint::operator+=().

const QPoint operator- ( const QPoint & p1, const QPoint & p2 )

Returns a QPoint object that is formed by subtracting p2 from p1; each component is subtracted separately.

See also QPoint::operator-=().

const QPoint operator- ( const QPoint & point )

This is an overloaded member function, provided for convenience.

Returns a QPoint object that is formed by changing the sign of both components of the given point.

Equivalent to QPoint(0,0) - point.

const QPoint operator/ ( const QPoint & point, qreal divisor )

Returns the QPoint formed by dividing both components of the given point by the given divisor.

Note that the result is rounded to the nearest integer as points are held as integers. Use QPointF for floating point accuracy.

See also QPoint::operator/=().

QDataStream & operator<< ( QDataStream & stream, const QPoint & point )

This is an overloaded member function, provided for convenience.

Writes the given point to the given stream and returns a reference to the stream.

See also Format of the QDataStream Operators.

bool operator== ( const QPoint & p1, const QPoint & p2 )

This is an overloaded member function, provided for convenience.

Returns true if p1 and p2 are equal; otherwise returns false.

QDataStream & operator>> ( QDataStream & stream, QPoint & point )

This is an overloaded member function, provided for convenience.

Reads a point from the given stream into the given point and returns a reference to the stream.

See also Format of the QDataStream Operators.