Qt:Документация 4.3.2/qsize

Материал из Wiki.crossplatform.ru

Версия от 08:56, 14 ноября 2008; Root (Обсуждение | вклад)
(разн.) ← Предыдущая | Текущая версия (разн.) | Следующая → (разн.)
Перейти к: навигация, поиск
40px Внимание: Актуальная версия перевода документации находится здесь

__NOTOC__

Image:qt-logo.png

Главная · Все классы · Основные классы · Классы по группам · Модули · Функции

Image:trolltech-logo.png

Содержание

[править] QSize Class Reference
[модуль QtCore ]

The QSize class defines the size of a two-dimensional object using integer point precision. More...

 #include <QSize>

[править] Открытые функции

[править] Связанные не-члены

  • bool operator!= ( const QSize & s1, const QSize & s2 )
  • const QSize operator* ( const QSize & size, qreal factor )
  • const QSize operator* ( qreal factor, const QSize & size )
  • const QSize operator+ ( const QSize & s1, const QSize & s2 )
  • const QSize operator- ( const QSize & s1, const QSize & s2 )
  • const QSize operator/ ( const QSize & size, qreal divisor )
  • QDataStream & operator<< ( QDataStream & stream, const QSize & size )
  • bool operator== ( const QSize & s1, const QSize & s2 )
  • QDataStream & operator>> ( QDataStream & stream, QSize & size )

[править] Подробное описание

The QSize class defines the size of a two-dimensional object using integer point precision.

A size is specified by a width() and a height(). It can be set in the constructor and changed using the setWidth(), setHeight(), or scale() functions, or using arithmetic operators. A size can also be manipulated directly by retrieving references to the width and height using the rwidth() and rheight() functions. Finally, the width and height can be swapped using the transpose() function.

The isValid() function determines if a size is valid (a valid size has both width and height greater than zero). The isEmpty() function returns true if either of the width and height is less than, or equal to, zero, while the isNull() function returns true only if both the width and the height is zero.

Use the expandedTo() function to retrieve a size which holds the maximum height and width of this size and a given size. Similarly, the boundedTo() function returns a size which holds the minimum height and width of this size and a given size.

QSize objects can be streamed as well as compared.

See also QSizeF, QPoint, and QRect.


[править] Описание функций-членов

[править]
QSize::QSize ()

Constructs a size with an invalid width and height (i.e., isValid() returns false).

See also isValid().

[править]
QSize::QSize ( int width, int height )

Constructs a size with the given width and height.

See also setWidth() and setHeight().

[править]
QSize QSize::boundedTo ( const QSize & otherSize ) const

Returns a size holding the minimum width and height of this size and the given otherSize.

See also expandedTo() and scale().

[править]
QSize QSize::expandedTo ( const QSize & otherSize ) const

Returns a size holding the maximum width and height of this size and the given otherSize.

See also boundedTo() and scale().

[править]
int QSize::height () const

Returns the height.

See also width() and setHeight().

[править]
bool QSize::isEmpty () const

Returns true if either of the width and height is less than or equal to 0; otherwise returns false.

See also isNull() and isValid().

[править]
bool QSize::isNull () const

Returns true if both the width and height is 0; otherwise returns false.

See also isValid() and isEmpty().

[править]
bool QSize::isValid () const

Returns true if both the width and height is equal to or greater than 0; otherwise returns false.

See also isNull() and isEmpty().

[править]
int & QSize::rheight ()

Returns a reference to the height.

Using a reference makes it possible to manipulate the height directly. For example:

 QSize size(100, 10);
 size.rheight() += 5;
 
 // size becomes (100,15)

See also rwidth() and setHeight().

[править]
int & QSize::rwidth ()

Returns a reference to the width.

Using a reference makes it possible to manipulate the width directly. For example:

 QSize size(100, 10);
 size.rwidth() += 20;
 
 // size becomes (120,10)

See also rheight() and setWidth().

[править]
void QSize::scale ( int width, int height, Qt::AspectRatioMode mode )

Scales the size to a rectangle with the given width and height, according to the specified mode:

  • If mode is Qt::IgnoreAspectRatio, the size is set to (width, height).
  • If mode is Qt::KeepAspectRatio, the current size is scaled to a rectangle as large as possible inside (width, height), preserving the aspect ratio.
  • If mode is Qt::KeepAspectRatioByExpanding, the current size is scaled to a rectangle as small as possible outside (width, height), preserving the aspect ratio.

Example:

 QSize t1(10, 12);
 t1.scale(60, 60, Qt::IgnoreAspectRatio);
 // t1 is (60, 60)
 
 QSize t2(10, 12);
 t2.scale(60, 60, Qt::KeepAspectRatio);
 // t2 is (50, 60)
 
 QSize t3(10, 12);
 t3.scale(60, 60, Qt::KeepAspectRatioByExpanding);
 // t3 is (60, 72)

See also setWidth() and setHeight().

[править]
void QSize::scale ( const QSize & size, Qt::AspectRatioMode mode )

This is an overloaded member function, provided for convenience.

Scales the size to a rectangle with the given size, according to the specified mode.

[править]
void QSize::setHeight ( int height )

Sets the height to the given height.

See also rheight(), height(), and setWidth().

[править]
void QSize::setWidth ( int width )

Sets the width to the given width.

See also rwidth(), width(), and setHeight().

[править]
void QSize::transpose ()

Swaps the width and height values.

See also setWidth() and setHeight().

[править]
int QSize::width () const

Returns the width.

See also height() and setWidth().

[править]
QSize & QSize::operator*= ( qreal factor )

Multiplies both the width and height by the given factor, and returns a reference to the size.

Note that the result is rounded to the nearest integer.

See also scale().

[править]
QSize & QSize::operator+= ( const QSize & size )

Adds the given size to this size, and returns a reference to this size. For example:

 QSize s( 3, 7);
 QSize r(-1, 4);
 s += r;
 
 // s becomes (2,11)

[править]
QSize & QSize::operator-= ( const QSize & size )

Subtracts the given size from this size, and returns a reference to this size. For example:

 QSize s( 3, 7);
 QSize r(-1, 4);
 s -= r;
 
 // s becomes (4,3)

[править]
QSize & QSize::operator/= ( qreal divisor )

Divides both the width and height by the given divisor, and returns a reference to the size.

Note that the result is rounded to the nearest integer.

See also QSize::scale().


[править] Связанные не-члены

[править]
bool operator!= ( const QSize & s1, const QSize & s2 )

This is an overloaded member function, provided for convenience.

Returns true if s1 and s2 are different; otherwise returns false.

[править]
const QSize operator* ( const QSize & size, qreal factor )

This is an overloaded member function, provided for convenience.

Multiplies the given size by the given factor, and returns the result rounded to the nearest integer.

See also QSize::scale().

[править]
const QSize operator* ( qreal factor, const QSize & size )

This is an overloaded member function, provided for convenience.

Multiplies the given size by the given factor, and returns the result rounded to the nearest integer.

[править]
const QSize operator+ ( const QSize & s1, const QSize & s2 )

This is an overloaded member function, provided for convenience.

Returns the sum of s1 and s2; each component is added separately.

[править]
const QSize operator- ( const QSize & s1, const QSize & s2 )

This is an overloaded member function, provided for convenience.

Returns s2 subtracted from s1; each component is subtracted separately.

[править]
const QSize operator/ ( const QSize & size, qreal divisor )

This is an overloaded member function, provided for convenience.

Divides the given size by the given divisor, and returns the result rounded to the nearest integer.

See also QSize::scale().

[править]
QDataStream & operator<< ( QDataStream & stream, const QSize & size )

This is an overloaded member function, provided for convenience.

Writes the given size to the given stream, and returns a reference to the stream.

See also Format of the QDataStream Operators.

[править]
bool operator== ( const QSize & s1, const QSize & s2 )

This is an overloaded member function, provided for convenience.

Returns true if s1 and s2 are equal; otherwise returns false.

[править]
QDataStream & operator>> ( QDataStream & stream, QSize & size )

This is an overloaded member function, provided for convenience.

Reads a size from the given stream into the given size, and returns a reference to the stream.

See also Format of the QDataStream Operators.


Copyright © 2007 Trolltech Trademarks
Qt 4.3.2